%!PS

% Superbly Legible Fonts:   An Improved Bitmap Typewriter
% ======================================================================
% by  Don Lancaster

/ggnum 53 store

%  Copyright c 2005 by Don Lancaster & Synergetics, Box 809, Thatcher, AZ, 85552
%  (928) 428-4073 Email: don@tinaja.com Website: http://www.tinaja.com
%  Consulting services available http://www.tinaja.com/info01.html
%  Linking welcome. Reposting expressly forbidden. 

%  All commercial rights and all electronic media rights ~fully~ reserved.
%  Linking usually welcome. Reposting expressly forbidden. Version 1.1 

%  IMPORTANT NOTE: Don Lancaster's file gonzo.ps is required for this program.
%  After obvious location mods, uncomment ONE of the following two lines:

(C:\\Documents and Settings\\don\\Desktop\\gonzo\\gonzo.ps) run  % use internal gonzo
%  (A:\\gonzo.ps) run  % use external gonzo

%  NOTE THAT ALL PS FILENAME STRINGS !!!DEMAND!!! DOUBLE REVERSE SLASHES.

%  GONZO20A Guru Gonzo PostScript power tools (Interim release)
%  Includes gonzo justification and layout utilities.

%  Copyright c 1990, 1996, 2001 by Don Lancaster and Synergetics, Box 809,
%  Thatcher Arizona, 5552 (928) 428-4073  don@tinaja.com  support
%  via http://www.tinaja.com  All commercial rights and all electronic
%  media rights **FULLY** reserved. Reposting is expressly forbidden.


%%%%%%%%%%% links menu directory %%%%%%%%%%%%

% This code locks pdfmark commands out of a PostScript printer.

/pdfmark where {pop}{userdict /pdfmark /cleartomark load put} ifelse

% /surl "start url" marks the beginning of a text sequence to be urled. 
% It also paints the text blue...

/surl {mark /blue cvx 0.33 /setgray cvx     % change text to blue
       /currentpoint cvx                    % remember box start
       /urly /exch cvx /store cvx
       /urlx /exch cvx /store cvx
         ] cvx                              % complete deferred command

       printlist exch 3 index exch put      % stuff into gonzo printlist
       exch 1 add exch                      % increment gonzo list count
} def

% /eurl "end url" unmarks the end of a text sequence and sets up
% the pdfmark needed to define the Acrobat web link. 

/eurl {mark                               % start deferred proc      
       exch                               % position url string
       % /black cvx 0  /setgray cvx         % turn blue marker off 
       % maintextcolor /setrgbcolor  cvx    % reset to main text color???

       /aqua cvx /black cvx
       /makeurl cvx                       % defer call of url builder
        ] cvx                             % complete deferred proc

        printlist exch 3 index exch       % stuff into gonzo printlist
        put exch 1 add exch               % increment gonzo list count      
        } def


% /makeurl generates the pdfmark, receiving a {(urlstring) makeurl}.
% Note that it is not called until formatted printlist time...

/urlover 0.2 def                    % fraction of hot area over bounds

/makeurl { /cururlname exch store          % save the url string
            mark                           % start pdfmark

currentfont /ScaleMatrix get 3 get /fsize exch store  % guess height

  /Rect  [ urlx fsize urlover mul sub      % set box left x
           urly fsize urlover mul sub      % set box left y
           currentpoint
           exch fsize urlover mul add exch
           fsize add
           ]
           /Border [ 0 0 0]   % [0 0 0 ] = none; [0 0 2] = debug 
           /Color [ .7 0 0 ]
           /Action <</Subtype /URI /URI cururlname>>
           /Subtype /Link
           /ANN                            % annotation type
           pdfmark                        % call pdf operators    
} def

% /makeurlx generates the box specific pdfmark, receiving 
% a {(urlstring) makeurl}.
% Note that it is not called until formatted printlist time...


/makeurlx { /cururlnamex exch store        % save the url string
            mark                           % start pdfmark

  /Rect  [ xpos                            % set box left x
           ypos 0.9 sub                    % set box left y
           xpos 2.8 add                    % box right x
           ypos 0.9 sub 2.8 add            % box right y
           ]
           /Border [ 0 0 0]   % [0 0 0 ] = none; [0 0 2] = debug 
           /Color [ .7 0 0 ]
           /Action <</Subtype /URI /URI cururlnamex>>
           /Subtype /Link
           /ANN                            % annotation type
           pdfmark                        % call pdf operators    
} def


/maintextcolor {0 0 0 } def

% text link specific data  -- use dictionary instead below


{

/cubic01 {(http://www.tinaja.com/cubic01.asp) eurl} def
/hack62 {(http://www.tinaja.com/glib/hack62.pdf) eurl} def
/increment {(http://www.tinaja.com/text/bezgen3.html) eurl} def
/interpolate {(http://members.bellatlantic.net/~vze2vrva/design.html) eurl } def

/bezmath {(http://www.tinaja.com/text/bezmath.html) eurl } def

/table {(http://www.tinaja.com/psutils/imtable.psl) eurl } def



} pop



% dictionary method

<<    % zzzzzzzzzzzzzzzzzz


% added with suplement


/tek576.jpg (http://www.tinaja.com/images/bargs/tek576.jpg)

/hp331002.jpg (http://www.tinaja.com/images/bargs/hp331002.jpg)
/sptimer1.jpg (http://www.tinaja.com/images/bargs/sptimer1.jpg)
/wave1001.jpg (http://www.tinaja.com/images/bargs/wave1001.jpg)

/autobm1.psl (http://www.tinaja.com/psutils/autobmf1.psl) 
/bmdemo1.bmp (http://www.tinaja.com/psutils/bmdemo1.bmp)

/adobeifilter (http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows)
/myriadfont (http://store.adobe.com/type/browser/P/P_1706.html)
/stonefont (http://store.adobe.com/type/browser/F/STAQ/F_STAQ-11705000.html)
/cleartype (http://grc.com/cleartype.htm)


/adobeacrobat (http://www.adobe.com/products/acrobat/main.html)


/acroread (http://www.adobe.com/products/acrobat/readstep2.html)
/dutchdare (http://www.darenet.nl/page/language.view/home)

/sedn (news:///sci.electronics.design) 
/sern (news:///sci.electronics.repair) 

/mcmaster (http://www.mcmaster.com/ )
/smallparts (http://www.smallparts.com/  )
/grainger (http://www.grainger.com/Grainger/  )
/mouser (http://www.mouser.com/ )
/digikey (http://www.digikey.com/ )
/allied (http://www.alliedelec.com/ )
/newark (http://www.newark.com/)
/thomasreg (http://www.thomasregister.com/)

/whtnu05 (http://www.tinaja.com/whtnu05.asp)
/refurblg.pdf (http://www.tinaja.com/glib/refurblg.pdf)
/refurb.pdf (http://www.tinaja.com/glib/refurb.pdf)
/advetorl.pdf (http://www.tinaja.com/glib/advetorl.pdf)
/sotofamilia (http://cgi6.ebay.com/ws/eBayISAPI.dll?MfcISAPICommand=ViewListedItems&userid=sotofamilia&include=0&since=7&sort=3&rows=100)
/marcia.pdf (http://www.tinaja.com/glib/marcia.pdf)
/auctscne.pdf (http://www.tinaja.com/glib/auctscne.pdf)
/ebaysell.pdf (http://www.tinaja.com/glib/ebaysell.pdf)
/ebayspoof (mailto:spoof@ebay.com)
/auct01links (http://www.tinaja.com/auct01.asp#links)
/enhebay2.pdf (http://www.tinaja.com/glib/enhebay2.pdf)
/enhebay1.pdf (http://www.tinaja.com/glib/enhebay1.pdf)

/pdfflash.pdf(http://www.tinaja.com/glib/pdfflash.pdf)

/adobejava (http://partners.adobe.com/public/developer/pdf/topic_js.html)
/p3anim01.pdf (http://www.tinaja.com/glib/p3anim01.pdf) 

/xpdf (http://www.foolabs.com/xpdf/)
/heapsort.pdf (http://www.tinaja.com/glib/heapsort.pdf)
/strconv.pdf (http://www.tinaja.com/glib/strconv.pdf)
/pdfrefman (http://partners.adobe.com/public/developer/pdf/index_reference.html)
/uncompresspdf.api (http://www.tinaja.com/plugins/uncompressPDF.api)

/adobeebooks (http://www.adobe.com/epaper/ebooks/main.html)
/viewpdf1.psl (http://www.tinaja.com/psutils/viewpdf1.psl)

/adobeacrobatsdk 
(http://partners.adobe.com/public/developer/acrobat/sdk/index_doc.html)

/adobejavascriptguide (http://partners.adobe.com/public/developer/acrobat/sdk/index_doc.html#js)
/wordfreq.pdf (http://www.tinaja.com/glib/wordfreq.pdf)

/azauct01.pdf (http://www.tinaja.com/glib/azauct01.pdf)
/startsdk.pdf (http://www.tinaja.com/glib/startsdk.pdf)
/flatevue.pdf (http://www.tinaja.com/glib/flatvue.pdf)
/wordfrq1.psl (http://www.tinaja.com/psutils/wordfrq1.psl)
/otherwf (http://www.mytranslate.com/wordfrequency.htm)
/homonyms (http://www.cooper.com/alan/homonym_list.html)

/wrightauct (http://www.wrightbrosauctioneers.com/)
/a1auct (http://www.a1auctionz.com/)
/auctbroke (http://www.auctionbrokers.us/)
/ronbrunk (http://www.brunksauction.com/)
/americawest (http://www.yellowpages-ads.com/01231827)
/azauctioneers (http://www.arizonaauctioneers.com/)
/dickerson (http://www.cfdauction.com/)
/wsmauct (http://www.westernsalesmanagement.com/)
/asustore (http://property.asu.edu/)
/uaauct (http://pacs.web.arizona.edu/pacs_home.html)
/schoolauct (http://web.archive.org/web/20040229230404/http://www.dist.maricopa.edu/surplus/other.html)
/haynieauct (http://www.chuckhaynieauctions.com/pages/1/index.htm)
/crawfordauct (http://www.tumbleweedauction.com/)
/mangold (http://www.azauctioneers.org/members/8402_OCMangold.asp)
/tingle (http://brucetingleauctioneering.com/)
/countass (http://www.soldyourway.com/)
/southwestliq (http://www.swliquidators.com/)
/maricopacoll (http://www.dist.maricopa.edu/surplus/)
/sierraauct (http://www.sierraauction.com/)
/cunninghamauct (http://www.auctionaz.com/)
/auctappr (http://www.auctionandappraise.com/)
/azauctionassn (http://www.azauctioneers.org/home.asp)
/natauctionassn (http://www.auctioneers.org/)

/azclassifieds (http://www.arizclassified.com/classifieds/index.inn)
/azrepublic  (http://www.azcentral.com/class/merch/) 
/tudailystar (http://classified.tucson.com/index.php?site_name=citizen) 
/enhebay1.pdf (http://www.tinaja.com/glib/enhebay1.pdf)

/busonly.psl (http://www.tinaja.com/psutils/busonly.psl)
/rebound1.psl (http://www.tinaja.com/glib/rebound1.pdf)
/rebound1.pdf (http://www.tinaja.com/glib/rebound1.psl)
/funfield.pdf (http://www.tinaja.com/glib/funfield.pdf)
/psar2img.pdf (http://www.tinaja.com/glib/psar2img.pdf)

/dovebid (http://www.dovebid.com)
/michaelfox (http://www.michaelfox.com)
/mjauctions (http://www.mjauctions.com)


/ucc (http://www.law.cornell.edu/ucc/)
/arizlaw (http://www.azleg.state.az.us/ArizonaRevisedStatutes.asp)

/vickrey (http://www.vanderbilt.edu/econ/reiley/papers/VickreyHistory.pdf) 
/whtnu04 (http://www.tinaja.com/whtnu04.asp)
/logrpt01.psl (http://www.tinaja.com/psutils/logrpt01.psl)
/nutilt01.psl (http://www.tinaja.com/psutils/nutilt01.psl)
/nubkg01.psl (http://www.tinaja.com/psutils/nubkg01.psl)
/dodbur01.psl (http://www.tinaja.com/psutils/dodbur01.psl)

/ebayphen.pdf (http://www.tinaja.com/glib/ebayphen.pdf)
/gallery.pdf (http://www.tinaja.com/glib/gallery.pdf)
/histolog (http://www.tinaja.com/glib/histolog.pdf)
/bmfonts (http://www.tinaja.com/glib/bmfonts.pdf)
/dodbur (http://www.tinaja.com/glib/dodgebur.pdf)
/ebayphoto (http://www.tinaja.com/glib/ebayfoto.pdf)
/auctscne (http://www.tinaja.com/glib/auctscne.pdf)
/stepprep (http://www.tinaja.com/glib/stepprep.pdf)

/phonenums (http://www.switchboard.com/bin/cgiqa.dll?MG=)
/reversephone (http://www.reversephonedirectory.com/)
/scholar (http://www.scholar.google.com/)
/shieldsup (https://grc.com/x/ne.dll?bh0bkyd2)
/sotofamilia (http://cgi6.ebay.com/ws/eBayISAPI.dll?MfcISAPICommand=ViewListedItems&userid=sotofamilia&include=0&since=7&sort=3&rows=100)
/topozone (http://www.topozone.com/)
/thomasreg (http://www.thomasregister.com/)
/uhaul (http://www.uhaul.com/)
/ups (http://www.ups.com/)
/usps (http://www.usps.com/)
/vrane (http://www.vrane.com)
/wayback (http://web.archive.org/)
/whois (http://www.networksolutions.com/cgi-bin/whois/whois)
/grainger (http://www.grainger.com/)
/zipcodes (http://www.usps.com/ncsc/lookups/lookup_zip+4.html)

/mcmaster (http://www.mcmaster.com/)
/mscsupply (http://www.mscdirect.com/)
/natauctioneers (http://www.auctioneers.org/)
/newspapers (http://www.usnpl.com/)
/norfolk (http://www.norfolkandwaay.com)
/quickphrase (http://www.typingmaster.com/index.asp?go=quickphrase)
/myebays (http://www.tinaja.com/glib/myebays.pdf)
/moreebay (http://www.tinaja.com/glib/moreebay.pdf)
/mapsonus (http://www6.mapsonus.com/)
/aafont01 (http://www.tinaja.com/aafont01.asp)
/froogle (http://www.froogle.com)
/govliquidation (http://www.govliquidation.com)
/intershipper (http://www.intershipper.com)
/kelly (http://www.kbb.com)

/paypal (https://www.paypal.com/refer/pal=don%40tinaja.com)
/ebaysell (http://www.tinaja.com/glib/ebaysell.pdf)
/ebaybuy (http://www.tinaja.com/glib/ebaybuy.pdf)
/deja  (http://groups.google.com/googlegroups/deja_announcement.html)
/drhtml (http://www2.imagiware.com/RxHTML/)
/fedex (http://www.fedex.com/us/)

/currency (http://www.xe.net/ucc/)
/terraserver (http://terraserver-usa.com/)
/areacode (http://decoder.americom.com/cgi-bin/decoder.cgi)
/asiansources (http://www.asia.globalsources.com/HOMEPAGES/ASOL/HOME)
/ebaystore (http://stores.ebay.com/synergeticsabeja)
/amazon (http://www.amazon.com/exec/obidos/redirect-home/donlancastersgur/)
/aucres01 (http://www.tinaja.com/aucres01.asp)
/auctlinks (http://www.tinaja.com/auct01.asp#links)
/wayback (http://www.archive.org/web/web.php)
/agilent (http://www.agilent.com)

/fields01.psl (http://www.tinaja.com/glib/fields01.psl)
/fields01.pdf (http://www.tinaja.com/glib/fields01.pdf)

/maxwells (http://hyperphysics.phy-astr.gsu.edu/hbase/electric/maxeq.html#c3)
/muse121 (http://www.tinaja.com/glib/muse121.pdf)
/maxwellbook (http://www.amazon.com/exec/obidos/ISBN=0486606368/donlancastersgurA)


/transtronics (http://www.transtronics.com)
/sigview.pdf (http://www.tinaja.com/glib/sigview.pdf)
/mscal28nd.asp (http://www.tinaja.com/mscal28nd.asp)
/microchip (http://www.microchip.com)
/numschip.pdf (http://www.tinaja.com/glib/numschip.pdf)
/numschip.psl (http://www.tinaja.com/glib/numschip.psl)
/msd28a.asm (http://www.tinaja.com/glib/msd28a.asm)

/lineartechnology (http://www.lineartechnology.com) 

/bmtypewr (http://www.tinaja/com/psutils/bmtypewr.psl)
/distlang.pdf (http://www.tinaja.com/glib/distlang.pdf)
/muse141 (http://www.tinaja.com/glib/muse141.pdf)
/screenthief (http://www.keyscreen.com/KeyScreen(s)5/scrnthf.htm)

/giffont (http://www.tinaja.com/bmfonts/giffont1.bmp)

/f507bg.txt (http://www.tinaja.com/bmfonts/f507bg.txt)
/f507bg.psl (http://www.tinaja.com/bmfonts/f507bg.psl)
/f507bg.pdf (http://www.tinaja.com/bmfonts/f507bg.pdf)
/f607bg.txt (http://www.tinaja.com/bmfonts/f607bg.txt)
/f707bg.txt (http://www.tinaja.com/bmfonts/f707bg.txt)

/imgwrds1.psl (http://www.tinaja.com/psutils/imgwrds1.psl)
/bmfont01 (http://www.tinaja.com/bmfont01.asp)
/expbmp.psl (http://www.tinaja.com/glib/expbmp.pdf)
/kikisu (http://www.tinaja.com/images/bargs/ki710101.jpg)
/hp3336a (http://www.tinaja.com/images/bargs/hp333601.jpg)

/bmtransfer (http://www.tinaja.com/bmfonts/lettex01.bmp)

/histolog.pdf (http://www.tinaja.com/glib/histolog.pdf)
/histolog.psl (http://www.tinaja.com/glib/histolog.psl)

/site01 (http://www.tinaja.com/site01.asp)
/dayproc1.psl (http://www.tinaja.com/psutils/dayproc1.psl)
/trail30.psl   (http://www.tinaja.com/psutils/trail30.psl)
/logrptm1.psl (http://www.tinaja.com/psutils/logrptm1.psl)
/logrpt01.psl (http://www.tinaja.com/psutils/logrpt01.psl)

/powerfit (http://www.tinaja.com/glib/powerfit.pdf)
/pssort (http://www.tinaja.com/glib/pssort.pdf)
/heapsort (http://www.tinaja.com/glib/heapsort.pdf)
/bashpseu (http://www.tinaja.com/glib/bashpseu.pdf)
/pseudo01 (http://www.tinaja.com/pseudo01.asp)
/muse112 (http://www.tinaja.com/glib/muse112.pdf)
/muse113 (http://www.tinaja.com/glib/muse113.pdf)
/muse89 (http://www.tinaja.com/glib/muse89.pdf)
/muse151 (http://www.tinaja.com/glib/muse151.pdf)
/pssecrets (http://www.tinaja.com/glib/pssecrets.pdf)
/bouncy (http://www.tinaja.com/glib/bouncy.pdf)
/vectstep (http://www.tinaja.com/glib/vectstep.pdf)
/muse102 (http://www.tinaja.com/glib/muse102.pdf)
/onesword (http://www.tinaja.com/text/onesword.html)
/emergop2 (http://www.tinaja.com/glib/emergop2.pdf)
/wave01 (http://www.tinaja.com/wave01.asp)
/chaincode (http://www.tinaja.com/text/chain01.html)
/muse152 (http://www.tinaja.com/glib/muse152.pdf)
/atg1 (http://www.tinaja.com/glib/atg1.pdf)
/hack62 (http://www.tinaja.com/glib/hack62.pdf)
/psinscrt (http://www.tinaja.com/glib/psinscrt.pdf)
/fern2img (http://www.tinaja.com/psutils/fern2img.psl)
/thefern (http://www.tinaja.com/psutils/fern2img.pdf)

/cmoscb (http://www.amazon.com/exec/obidos/ISBN%3D0750699434/donlancastersgurA/002-0496817-3688016)

/activecb (http://www.amazon.com/exec/obidos/ISBN%3D075062986X/donlancastersgurA/002-0496817-3688016)
/hack64 (http://www.tinaja.com/glib/hack64.pdf)
/nss (http://www.caves.org)
/sinquest (http://www.tinaja.com/glib/sinquest.pdf)
/askguru  (http://www.tinaja.com/glair01.asp)

/assycb (http://www.amazon.com/exec/obidos/ISBN%3D0672223317/donlancastersgurA/002-3338585-9572047)
/muse105 (http://www.tinaja.com/glib/muse105.pdf)
/muse107 (http://www.tinaja.com/glib/muse107.pdf)
/resbn90 (http://www.tinaja.com/glib/resbn90.pdf)
/hackar3 (http://www.tinaja.com/glib/hackar3.pdf) 
/testdemo (http://www.tinaja.com/glib/FULL60-1.ASC)

/mschips (http://www.tinaja.com/glib/mschips.pdf)
/sigview (http://www.sigview.com)
/ggsigview (http://www.tinaja.com/glib/sigview.pdf)
/mock (http://www.technicalworks.com)
/xtronics (http://www.xtronics.com/)
/oshen (http://www.oshonsoft.com/pic.html)

/heapps01 (http://www.tinaja.com/psutils/heapps01.psl)
/distlangpdf (http://www.tinaja.com/glib/distlang.pdf)
/strconv (http://www.tinaja.com/glib/strconv.pdf)
/fancysort (http://linux.wku.edu/~lamonml/algor/sort)
/presort (http://www.tinaja.com/psutils/presort1.psl)
/psnt (http://www.tinaja.com/glib/psnt.pdf) 
/insort (http://www.tinaja.com/psutils/insort.ps)
/bublsort (http://www.tinaja.com/psutils/bublsort.ps)
/oldstrconv (http://www.tinaja.com/psutils/strconv.html) 

/psdisk03 (http://www.tinaja.com/glib/psdisk03.pdf)
/muse01 (http://www.tinaja.com/muse01.asp)
/gonzopow (http://www.tinaja.com/glib/gonzopow.pdf)
/analogeb (http://www.tinaja.com/glib/analogeb.pdf)
/psdisk03 (http://www.tinaja.com/glib/psdisk03.pdf)
/flut01 (http://www.tinaja.com/flut01.asp)
/clpng (news:///comp.lang.postscript)
/ctpng (news:///comp.text.pdf)

/yahoo (http://www.yahoo.com)
/google (http://www.google.com)
/scodes (http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html)
/whois (http://www.networksolutions.com/en_US/whois/index.jhtml)
/zekes (http://www.zekes.com)
/logfileformat (http://www.microsoft.com/windows2000/en/server/iis/default.asp?url=/windows2000/en/server/iis/htm/core/iicnvlg.htm)
/logrpt01.psl (http://www.tinaja.com/psutils/logrpt01.psl)
/logrpt01.log (http://www.tinaja.com/psutils/logrpt01.log)
/ex031126 (http://www.tinaja.com/psutils/ex031126.log)


/picup01 (http://www.tinaja.com/picup01.asp)
/webwb01 (http://www.tinaja.com/webwb01.asp)
/muse90 (http://www.tinaja.com/glib/muse90.pdf)
/vismagsn (http://www.tinaja.com/glib/vismagsn.psl)
/vismagsn.pdf (http://www.tinaja.com/glib/vismagsn.pdf)
/msquant (http://www.tinaja.com/glib/msquant.psl)
/optjit01 (http://www.tinaja.com/psutils/optjit01.psl)
/optjit01demo (http://www.tinaja.com/psutils/optjit01.pdf)
/qall01 (http://www.tinaja.com/psutils/qall01.psl)

/deltapat (http://www.tinaja.com/psutils/deltapat.pdf)
/deltapat.pdf (http://www.tinaja.com/psutils/deltapat.pdf)
/deltapat.psl (http://www.tinaja.com/psutils/deltapat.psl)

/mindist1 (http://www.tinaja.com/glib/mindist1.pdf)
/deltams1 (http://www.tinaja.com/glib/deltams1.pdf)
/grabjpg (http://www.tinaja.com/psutils/grabjpg.psl)
/gallery (http://www.tinaja.com/glib/gallery.pdf)
/nutour01 (http://wwww.tinaja.com/nutour01.pdf)

/linkpdf1 (http://www.tinaja.com/glib/linkpdf1.html)

/ebayfoto (http://www.tinaja.com/glib/ebayfoto.pdf)
/jpeg2pdf.html (http://www.tinaja.com/text/jpeg2pdf.html)

/pdf2bmp (http://www.tinaja.com/psutils/pdf2bmp.psl)
/bitmfont (http://www.tinaja.com/psutils/bitmfont.txt)
/antifontpsl (http://www.tinaja.com/psutils/antifont.psl)
/antifonttxt (http://www.tinaja.com/psutils/antifont.txt)

/histog01 (http://www.tinaja.com/psutils/histog01.psl)
/swingtlt (http://www.tinaja.com/glib/swingtlt.pdf)
/newsamoe (news:///alt.marketing/online.ebay) 
/webtrends (http://www.netiq.com/webtrends/default.asp)
/stegan (http://63.140.207.28/books/bkwater.asp)
/nodi (http://www.pages.ebay.com/help/community/notice-infringe2.pdf)
/ebayvero (http://www.pages.ebay.com/help/community/vero-program.html)
/aboutme (http://members.ebay.com/aboutme/abeja/)
/magfill2 (http://www.tinaja.com/psutils/magfill2.psl)
/bmprpt01 (http://www.tinaja.com/psutils/bmprpt01.psl)
/waywere (http://www.tinaja.com/glib/waywere.pdf)

/nikon (http://www.nikon.com)
/bayer (http://www.coreco.com/Web/wbtools3.nsf/0/87fce126f109ea3a05256c7100591c9a?OpenDocument) 

/hewpack (http://www.hp.com)
/auct01 (http://www.tinaja.com/auct01.asp)
/blat01 (http://www.tinaja.com/auct01.asp)
/moreebay (http://www.tinaja.com/glib/moreebay.pdf)
/auctscne (http://www.tinaja.com/glib/auctscne.pdf)






/autourl (http://www.tinaja.com/glib/autourl.pdf)
/msintro1 (http://www.tinaja.com/glib/msintro1.pdf)
/msintrosource (http://www.tinaja.com/glib/msintro1.psl) 
/knockout (http://www.tinaja.com/glib/knockout.bmp) 

/stepsynt (http://www.tinaja.com/glib/stepsynt.pdf)
/msintro1 (http://www.tinaja.com/glib/msintro1.pdf)
/msinprop (http://www.tinaja.com/glib/msinprop.pdf)

/muse106 (http://www.tinaja.com/glib/muse106.pdf)
/muse142 (http://www.tinaja.com/glib/muse142.pdf)
/math01 (http://www.tinaja.com/math01.asp)
/cubic01 (http://www.tinaja.com/cubic01.asp)
/bez4pts (http://www.tinaja.com/glib/bez4pts.pdf)
/muse145 (http://www.tinaja.com/glib/muse145.pdf)
/muse148 (http://www.tinaja.com/glib/muse148.pdf)
/curveft3 (http://www.tinaja.com/psutils/curveft3.psl)
/fuzzybez (http://www.tinaja.com/glib/fuzzybez.pdf)

/bmprpt01 (http://www.tinaja.com/psutils/bmprpt01.psl)
/nowhit01 (http://www.tinaja.com/psutils/nowhit01.psl)
/blender (http://www.tinaja.com/psutils/blender.psl)
/speedup2 (http://www.tinaja.com/glib/speedup2.pdf)
/histog01 (http://www.tinaja.com/psutils/histog01.psl)
/imgviewer32 (http://www.arcatapet.net/imgv32.cfm)
/basis (http://www.tinaja.com/glib/basis.pdf)
/expbmp (http://www.tinaja.com/glib/expbmp.pdf)
/dodbur01 (http://www.tinaja.com/psutils/dodbur01.psl)
/dodgebur (http://www.tinaja.com/glib/dodgebur.pdf) 

/magfill1 (http://www.tinaja.com/psutils/magfill1.psl)
/swingt01 (http://www.tinaja.com/psutils/swingt01.psl)

/before01 (http://www.tinaja.com/images/bargs/marcon01.jpg)
/during01 (http://www.tinaja.com/images/bargs/marcon01.bmp)
/after01 (http://www.tinaja.com/images/bargs/marconz1.jpg)
/repobmp (http://www.tinaja.com/glib/repobmp.pdf)
/basis01 (http://www.tinaja.com/glib/basis.pdf)

/arcata (http://www.arcatapet.net/imgv32.cfm) 


/comparebmp (http://www.designer-info.com/Writing/bmp_tiff_jpeg_gif.htm)
/imagimag (http://www.tinaja.com/glib/imagimag.pdf)
/myebays (http://www.tinaja.com/glib/myebays.pdf)
/stepprep (http://www.tinaja.com/glib/stepprep.pdf)
/aafont01 (http://www.tinaja.com/aafont01.asp)

/here1 (http://village.infoweb.ne.jp/~fwhw1257/study/bmpform.htm)
/here2 (http://www.daubnet.com/formats/BMP.html)

/bittype (http://www.tinaja.com/psutils/pdf2bmp.psl)
/photocombine (http://www.tinaja.com/psutils/blender.psl)

/psl (http://www.tinaja.com/psutils/) % dummy temp

/psl1 (http://www.tinaja.com/psutils/pdf2bmp.psl) 
/psl2 (http://www.tinaja.com/psutils/acatdata.psl) 
/psl3 (http://www.tinaja.com/psutils/catwords.psl) 
/psl4 (http://www.tinaja.com/psutils/graburls.psl) 
/psl5 (http://www.tinaja.com/psutils/blender.psl) 
/psl6 (http://www.tinaja.com/psutils/catools1.psl) 
/psl7 (http://www.tinaja.com/psutils/strconv.html) 
/psl8 (http://www.tinaja.com/psutils/bodcat.psl) 
/psl9 (http://www.tinaja.com/psutils/flatvue1.psl) 
/psl10 (http://www.tinaja.com/psutils/fern2img.psl) 
/psl11 (http://www.tinaja.com/psutils/flutools.psl) 
/psl12 (http://www.tinaja.com/psutils/mscal156q.psl) 
/psl13 (http://www.tinaja.com/psutils/weblogu2.psl) 
/psl14 (http://www.tinaja.com/psutils/pfa2pfb.psl) 
/psl15 (http://www.tinaja.com/psutils/pfb2pfa.psl) 
/psl16 (http://www.tinaja.com/glib/psdisk03.psl) 
/psl17 (http://www.tinaja.com/psutils/disktool.psl) 
/psl18 (http://www.tinaja.com/glib/psinscrt.psl) 
/psl19 (http://www.tinaja.com/glib/pssearch.psl) 
/psl20 (http://www.tinaja.com/text/refsum1.html)
/psl21 (http://www.tinaja.com/text/reflog1.html) 
/psl22 (http://www.tinaja.com/psutils/reflog1.psl) 
/psl23 (http://www.tinaja.com/psutils/refsum1.psl) 
/psl24 (http://www.tinaja.com/psutils/searepl.psl) 
/psl25 (http://www.tinaja.com/psutils/weberru2.psl) 
/psl26 (http://www.tinaja.com/psutils/grabsrch.psl) 
/psl27 (http://www.tinaja.com/psutils/grabrefs.psl) 



/magsn01 (http://www.tinaja.com/magsn01.asp)

/gonzoutils (http://www.tinaja.com/post01.asp#gonzo)

/disktool (http://www.tinaja.com/psutils/disktool.ps)

/elesimp (http://www.tinaja.com/glib/elesimp.pdf)
/tn5603 (http://partners.adobe.com/asn/developer/pdfs/tn/TN5603.Filters.pdf)

/fern2img (http://www.tinaja.com/psutils/fern2img.psl)
/fern     (http://www.tinaja.com/psutils/fern2img.pdf)
/oldfern  (http://www.tinaja.com/psutils/fernx1.pdf) 

/acrosdk (http://partners.adobe.com/asn/developer/acrosdk/main.html)


/refman2 (http://partners.adobe.com/asn/developer/pdfs/tn/psrefman.pdf)
/refman3 (http://partners.adobe.com/asn/developer/pdfs/tn/PLRM.pdf)

/s3011 (http://partners.adobe.com/asn/developer/pdfs/tn/PS3010and3011.Supplement.pdf)

/s2011 (http://ftp.ktug.or.kr/obsolete/info/adobe/devtechnotes/pdffiles/ps2011.supplement.pdf)
/s2012
(http://ftp.ktug.or.kr/obsolete/info/adobe/devtechnotes/pdffiles/ps2012.supplement.pdf)
/s2013
(http://ftp.ktug.or.kr/obsolete/info/adobe/devtechnotes/pdffiles/ps2013.supplement.pdf)
/s2014
(http://ftp.ktug.or.kr/obsolete/info/adobe/devtechnotes/pdffiles/ps2014.supplement.pdf)
/s2015
(http://ftp.ktug.or.kr/obsolete/info/adobe/devtechnotes/pdffiles/ps2015.supplement.pdf)
/s2016
(http://ftp.ktug.or.kr/obsolete/info/adobe/devtechnotes/pdffiles/ps2016.supplement.pdf)


/ghost (http://www.cs.wisc.edu/~ghost/)
/distlang (http://www.tinaja.com/psutils/distlang.html)

/adobepst (http://partners.adobe.com/asn/developer/technotes/)


/maildon (mailto:don@tinaja.com)
/tinaja (http://www.tinaja.com)
/adobe (http://www.adobe.com)
/adobesdk (http://partners.adobe.com/asn/developer/acrosdk/main.html)
/pstrans (http://www.tinaja.com/glib/pstrans.pdf)
/borland (http://www.borland.com/products/downloads/download_cbuilder.html)
/ebay
(http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=abeja&completed=0&sort=2&since=-1&include=0&page=1&rows=100)

/searepl (http://www.tinaja.com/psutils/searepl.psl)




/aasdk (http://www.tinaja.com/plugins/AboutAcrobatSDK.api)
/uncomp (http://www.tinaja.com/plugins/UncompressPDF.api)
/addimage (http://www.tinaja.com/plugins/AddImage.api)
/samplejpg (http://www.tinaja.com/plugins/sample.jpg)
/transparency (http://www.tinaja.com/plugins/Transparency.api)
/threerects (http://www.tinaja.com/plugins/threerects.pdf)
/watermark (http://www.tinaja.com/plugins/Watermark.api)
/verifyurls (http://www.tinaja.com/plugins/VerifyURLS.api)


/flate (http://www.tinaja.com/glib/flatvue.pdf)
/pstrans (http://www.tinaja.com/glib/pstrans.pdf)

/advt01 (http://www.tinaja.com/advt01.asp)
/amlink01 (http://www.tinaja.com/amlink01.asp)
/ng1 (news:///comp.text.pdf)  
/ng2 (news:///comp.lang.postscript)  

/msc++ (http://msdn.microsoft.com/visualc/productinfo/default.asp)

/degub (http://www.tinaja.com/glib/degub.pdf)



/ghostscript (http://www.artifex.com/pressreleases/GS70.htm)


/demox.psl  (http://www.tinaja.com/glib/g9demox.psl)
/demox.pdf  (http://www.tinaja.com/glib/g9demox.pdf)
/demo.pdf   (http://www.tinaja.com/glib/g9demo.pdf)
/flatvue (http://www.tinaja.com/glib/flatvue.psl)

/pdfrefman (http://partners.adobe.com/asn/developer/acrosdk/docs.html)

/psrefman 
(http://partners.adobe.com/asn/developer/technotes/postscript.html)

/pdfmrm
(http://partners.adobe.com/asn/developer/acrosdk/docs.html)

/tipdf
(http://partners.adobe.com/asn/developer/acrosdk/docs.html)

/asdk 
(http://partners.adobe.com/asn/developer/acrosdk)
          
/mtcr (http://support.adobe.com/devsup/devsup.nsf/docs/51864.htm)

/flatvue1 (http://www.tinaja.com/psutils/flatvue1.psl)
/acrob01 (http://www.tinaja.com/acrob01.asp)
/post01 (http://www.tinaja.com/post01.asp)
/info01 (http://www.tinaja.com/info01.asp)
/gurgrm01 (http://www.tinaja.com/gurgrm01.asp)

/energfun (http://www.tinaja.com/glib/energfun.pdf)

{

/tilley (http://www.tilleyfoundation.com)
/mnglobal (http://www.mnglobal.com/energy/pg2.htm)
/keely (http://www.keelynet.com)
/evolve (http://www.evolvedtechnology.com)
/hack64 (http://www.tinaja.com/glib/hack64.pdf)
/hackar3 (http://www.tinaja.com/glib/hackar3.pdf)
/resbn58 (http://www.tinaja.com/glib/resbn58.pdf)
/bppt (http://www.batterypoweronline.com)
/muse112 (http://www.tinaja.com/glib/muse112.pdf)
/muse113 (http://www.tinaja.com/glib/muse113.pdf)
/energfun (http://www.tinaja.com/glib/energfun.pdf)
/bashpseu (http://www.tinaja.com/glib/bashpseu.pdf)


/adobe (http://www.adobe.com)
/netscape (http://www.netscape.com)

/gallypsl (http://www.tinaja.com/galley1.psl)
/gallypdf (http://www.tinaja.com/galley1.pdf)

/atn5150 (http://partners.adobe.com/asn/developer/acrosdk/docs/createpdfapi/pdfmarkReference.pdf)

/nutour (http://www.tinaja.com/bargains/nutour02.pdf)
/nutoursource (http://www.tinaja.com/bargains/nutour02.psl) 

/bwhistle (http://www.tinaja.com/glib/bwhistle.pdf) 

/gonzo1 (http://www.tinaja.com/post01.asp#gonzo)


/barg01 (http://www.tinaja.com/barg01.asp)
/weblib01 (http://www.tinaja.com/weblib01.asp)
/gurgrm01 (http://www.tinaja.com/gurgrm01.asp)


/z1 (http://www.tinaja.com/bargains/thumb/albradz2.jpg)
/z2 (http://www.tinaja.com/bargains/sbtesteq.asp)
/z3 (http://www.tinaja.com/images/bargs/albrad02.jpg)

/z4 (http://www.tinaja.com/bargains/thumb/tutenaz2.jpg)
/z5 (http://www.tinaja.com/bargains/sbphone.asp)
/z6 (http://www.tinaja.com/images/bargs/tutena02.jpg)

/sourceme (http://www.tinaja.com/glib/gallery.psl)
/sourceme2 (http://www.tinaja.com/glib/autourl.psl)

} pop



>> {mark exch /eurl cvx ] cvx def} forall





%%%%%%%%%%%%%%%% New colorizer patches %%%%%%%%%%%%%%%%%%
 

 
/boxgrays 0.899 def
/grayshade boxgrays def
/mastergray boxgrays def
/staytint {0.33 setgray} def
/staytint1 {0.25 setgray} def
/showadgrays true def

/red {0 settint} def

 /Zmacro {staytint /ypos ypos 2 add def 72 300 div setlinewidth xpos 
ypos moveto
txtwide 0 rlineto stroke /ypos ypos -2 add def tintoff} def  % hair rule
 
 /amacro {(zy0)  stringmacro /ypos
  ypos ypara add def  0.33 setgray } def             % start drop cap
 /bmacro {(iFy1) stringmacro /ypos
  ypos ypara add def  black} def             % finish drop cap
 

 
% Gonzo character colorizer

/blueon {mark /blue cvx 0.33 /setgray cvx] cvx
        printlist exch 3 index exch put exch 1 add exch} def

/blueoff {mark /beige cvx 0  /setgray cvx] cvx
        printlist exch 3 index exch put exch 1 add exch} def

/tinton {mark 0.33 /setgray cvx] cvx
        printlist exch 3 index exch put exch 1 add exch} def

/tinton1 {mark 0.25 /setgray cvx] cvx
        printlist exch 3 index exch put exch 1 add exch} def


/tinton1b {mark beige cvx     % try for aqua after url???

 0.25 /setgray cvx] cvx
        printlist exch 3 index exch put exch 1 add exch} def

/tinton1a {mark /aqua cvx     % try for aqua after url???

 0.25 /setgray cvx] cvx
        printlist exch 3 index exch put exch 1 add exch} def

/tinton1p {mark /burple cvx     % try for aqua after url???

 0.25 /setgray cvx] cvx
        printlist exch 3 index exch put exch 1 add exch} def

/tinton1r {mark /red cvx     % try for aqua after url???

 0.25 /setgray cvx] cvx
        printlist exch 3 index exch put exch 1 add exch} def

/tinton1a {mark /aqua cvx     % try for aqua after url???

 0.25 /setgray cvx] cvx
        printlist exch 3 index exch put exch 1 add exch} def





/tinton1b {mark /beige cvx     % try for beige after url???

 0.25 /setgray cvx] cvx
        printlist exch 3 index exch put exch 1 add exch} def





/tintoff {mark 0 /setgray cvx] cvx
        printlist exch 3 index exch put exch 1 add exch} def


%%%%%%%%%%%%%% COMPACT  VERSION OF  COLORIZER II %%%%%%%%%%%%%%%%%%%%%%

/settint {dup /currenttint exch store 5.999 mul dup floor cvi /&cbar
          exch store dup floor sub /&cwt exch store [
{/setgray [ /dup cvx 0.3 &cwt 0.59 mul add /ge cvx
 [1 /exch cvx &cwt 0.59 mul 0.30 add /sub cvx 1 &cwt sub
 0.59 mul 0.11 add /div cvx /dup cvx 1 &cwt sub /mul cvx
 &cwt /add cvx /exch cvx ] cvx [ &cwt 0.59 mul 0.3 add /div
 cvx /dup cvx &cwt /mul cvx 0] cvx /ifelse cvx /setrgbcolor
 cvx] cvx /def cvx}
{/setgray [/dup cvx 0.59 1 &cwt sub 0.3 mul add /ge cvx
 [1 &cwt sub 0.3 mul 0.59 add /sub cvx &cwt 0.3 mul 0.11 add
 /div cvx /dup cvx &cwt /mul cvx 1 &cwt sub /add cvx /exch cvx
 1 /exch cvx] cvx [1 &cwt sub 0.3 mul 0.59 add /div cvx /dup
 cvx 1 &cwt sub /mul cvx /exch cvx 0] cvx /ifelse cvx
 /setrgbcolor cvx] cvx /def cvx}
{/setgray [/dup cvx 0.59 &cwt 0.11 mul add /ge cvx [&cwt
 0.11 mul 0.59 add /sub cvx 1 &cwt sub 0.11 mul 0.30 add
 /div cvx /dup cvx 1 &cwt sub /mul cvx &cwt /add cvx 1 /exch
 cvx] cvx [0 /exch cvx &cwt 0.11 mul 0.59 add /div cvx /dup cvx
 &cwt /mul cvx] cvx /ifelse cvx /setrgbcolor cvx] cvx
 /def cvx}
{/setgray [/dup cvx 0.59 1 &cwt sub mul 0.11 add /ge cvx [1 &cwt
 sub 0.59 mul 0.11 add /sub cvx &cwt 0.59 mul 0.30 add /div cvx
 /dup cvx &cwt /mul cvx 1 &cwt sub /add cvx 1] cvx [0 /exch cvx
 1 &cwt sub 0.59 mul 0.11 add /div cvx /dup cvx 1 &cwt sub /mul
 cvx /exch cvx] cvx /ifelse cvx /setrgbcolor cvx] cvx
/def cvx}
{/setgray [/dup cvx 0.11 &cwt 0.30 mul add /ge cvx[&cwt 0.30 mul
 0.11 add /sub cvx 1 &cwt sub 0.30 mul 0.59 add /div cvx /dup
 cvx 1 &cwt sub /mul cvx &cwt /add cvx /exch cvx 1] cvx [ &cwt
 0.30 mul 0.11 add /div cvx /dup cvx &cwt /mul cvx /exch cvx 0
 /exch cvx ] cvx /ifelse cvx /setrgbcolor cvx ] cvx /def cvx}
{/setgray [ /dup cvx 0.30 1 &cwt sub 0.11 mul add /ge cvx[ 1
 /exch cvx 1 &cwt sub 0.11 mul 0.30 add /sub cvx &cwt 0.11 mul
 0.59 add /div cvx /dup cvx &cwt /mul cvx 1 &cwt sub /add cvx
 ] cvx [ 1 &cwt sub 0.11 mul 0.30 add /div cvx /dup cvx
 1 &cwt sub /mul cvx 0 /exch cvx] cvx /ifelse cvx /setrgbcolor
 cvx ] cvx /def cvx}

] &cbar get exec exec} bind def

/beige  {0.10 settint} def      % examples of convenience operators
/aqua   {0.52 settint} def
/blue    {0.67 settint} def
/lime     {0.44 settint} def
/burple {0.75 settint} def

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%





/guru { gonzo begin
ps.util.1 begin printerror nuisance begin} def  % 

guru                                           % activate gonzo utilities


50 50 10 setgrid                               % create grid
% 56 61 showgrid  

/setpagefonts {

/cstretch 0.015 def
/sstretch 0.015 def
/font0 /StoneSans-Bold 1.6 gonzofont
/font1 /StoneSans 0.95 gonzofont
/font2 /StoneSans [0.95 0 0.25 0.95 0 0 ] gonzofont
/font4 /StoneSans 0.85 gonzofont
/font3 /StoneSans-Bold 0.85 gonzofont
/font6 /StoneSans-Bold 0.85 gonzofont
/font7 /StoneSans-Bold 1.05 gonzofont   % subheaders

/font8 /StoneSans-Bold [0.65 0 0 0.65 0 0.4] gonzofont

/txtwide 36 store

/yinc 1.2 store
/kern 0.1 store

/pm 1.5 store



aqua 0.33 setgray
font1

black




/amacro { mark /aqua cvx 0.33 /setgray cvx ] cvx
        printlist exch 3 index exch       % stuff into gonzo printlist
        put exch 1 add exch  } def

/bmacro { mark /black cvx ] cvx
        printlist exch 3 index exch       % stuff into gonzo printlist
        put exch 1 add exch  } def

/shiftin {xpos /xposhold exch store /xpos xpos 3 add store} def

/shiftout {/xpos xposhold store} def

/texttop 51 store
/textleft 3 store


/cmacro {aqua 0.25 setgray (znhL7) stringmacro

/xpos xpos 1.7 sub store

/ypos ypos .1 sub def

} def   % left title


/dmacro {black (pL1hz)  stringmacro

/xpos xpos 1.7 add store

/ypos ypos .1 add def} def       % normal text after centered title




/fmacro  % try and fake |
      {mark /gsave cvx 
         /currentpoint cvx
         /moveto cvx
         0.1 /setlinewidth cvx
         0 0.65 /rlineto cvx  /stroke cvx
         /grestore cvx
         ] cvx

       printlist exch 3 index exch put      % stuff into gonzo printlist
       exch 1 add exch                      % increment gonzo list count
} def


} def

setpagefonts

% -2 50.5 (optional header here \274) cl

%% Set document opening conventions. Note DOCVIEW limited.

[/CropBox [0 0 520 620]       % set the wierd size
/PAGES pdfmark 

[ {Catalog} <<
 /ViewerPreferences << /FitWindow true /CenterWindow true >>
 /PageLayout /OneColumn            % continous
 /Pagemode /UseNone                % no thumbs
 /View [/XYZ null null 1 ]         % force 100%
             >>
 /PUT pdfmark



%%%%%%%%%%%%%%%%% START DEMO ART   (not in use) %%%%%%%%%%%%%%%%


%%% Hand patching Info:

%  next available variable is /GS3 
%  transparency gstate is object 2
%  contents stream is object 18  gets  q /GS3 gs (xstuff) Q 
%  be sure to q Q bracket to localize
%  resources stream is object 19    gets  /GS3 2 0 R 


/transoverlay {

   % make a new graphics state
   [ /_objdef {newgsstate} /type /dict /OBJ pdfmark 

   % fill the new overlay graphics state - See PDF manual for details 
   [  {newgsstate}
          <<
            /Type /ExtGState 
            /ca 0.5                % fill transparency is 0.5
            /CA 0.5                % stroke transparency is 0.5
            /BM /Normal 
            /AIS false 
            /OP false 
            /OPM 1 
            /op true 
           >> /PUT

           pdfmark

    % start a Begin Picture graphics overlay subroutine...
    [ /BBox [0 0 1000 1000 ] /_objdef {overlaypix} /BP pdfmark

    % fill the Begin Picture graphics overlay Xobject subroutine...

          0 0.5 1 setrgbcolor     % on the aqua side of blue
          4 4 6 6 rectfill

    % complete the Begin Picture graphics overlay Xobject...
    [ /EP pdfmark

     } def


% Write a two squares program...

  /twosquares { gsave translate
                1 0.5 0 setrgbcolor            % red side of orange
                2 2 6 6 rectfill               % do background opaque box

                [ {overlaypix} /SP pdfmark     % show foreground transparent box

                grestore} def


%  Distill the two squares program. Initially use a BARE Distiller Job
%  Options that has no compression, no embedded fonts, and little else 


save /snap1 exch store
  
%%%  transoverlay                          % create new objects
%%%  14 17.5 twosquares
  
 snap1 restore

%%%%%%%%%%%% END DEMO %%%%%%%



%%%%%%%%%%%% PHOTO INSERTS %%%%%%%%%%

% When photos are needed, they are inserted here. Comment out otherwise.

%%%%%%%%% photo links %%%%%%%%%

% combined autopos jpeg conversion and hotlink:

/autofigure1 {save /af1 exch store  xpos ypos yinc add translate
              6 0.65 923 526 .025      % xpos ypos xres yres pixscale
              (http://www.tinaja.com/images/bargs/flu84501.jpg)   % url first
              (C:\\windows\\desktop\\aaraw_pix\\flu84501.jpg)
              jpegimageprocwithlink
              af1 restore} store

/autofigure2 {save /af2 exch store  xpos ypos yinc add translate
              8.5 -2 790 672  .020     % xpos ypos xres yres pixscale
              (http://www.tinaja.com/images/bargs/tek40841.jpg)   % url first
              (C:\\windows\\desktop\\aaraw_pix\\tek40841.jpg)
              jpegimageprocwithlink
              af2 restore} store

/autofigure3 {save /af3 exch store  xpos ypos yinc add translate
              12 0.6 530 816  .018     % xpos ypos xres yres pixscale
              (http://www.tinaja.com/images/bargs/sencri01.jpg)   % url first
              (C:\\windows\\desktop\\aaraw_pix\\sencri01.jpg)
              jpegimageprocwithlink
              af3 restore} store

/autofigure4 {save /af4 exch store  xpos ypos yinc add translate
              12 -0.4 422 612  .024      % xpos ypos xres yres pixscale
              (http://www.tinaja.com/images/bargs/abspar01.jpg)   % url first
              (C:\\windows\\desktop\\aaraw_pix\\abspar01.jpg)
              jpegimageprocwithlink
              af4 restore} store



/jpegimageprocwithlink {   % hoffset voffset hres vres

save /snap2 exch def

/infilename exch store  % grab passed pix file
/inurllink exch store   % grab link filename
/photoscale exch store  
/vpixels exch store
/hpixels exch store
 translate  % adjust position for final figure ???

inurllink
setareaurl    % autolink sizing

     /DeviceRGB setcolorspace                %  pick color model

     0 0 translate                           %  set page position
     hpixels vpixels scale                   %  magnify unit square


     photoscale dup scale
 

     /infile infilename (r) file def         %  establish input read file

     /Data {infile /DCTDecode filter} def    %  define a data source

     <<                                      % start image dicationary
            /ImageType 1                     % always one
            /Width hpixels                   % JPEG width in pixels
            /Height vpixels                  % JPEG height in pixels
            /ImageMatrix [hpixels
                          0 0 
                          vpixels neg
                          0
                          vpixels ]  


            /DataSource Data           % proc to get filtered JPEG      
           /BitsPerComponent 8              % color resolution
            /Decode [0 1 0 1 0 1]            % per red book 4.10
            >>

     image                                   % call the image operator


ypos snap2 restore /ypos exch def
} def

/setareaurl {    % for auto include routine

          /cururlname exch store

           mark                           % start pdfmark
           /Rect  [ 0 0 

              hpixels photoscale mul 
              vpixels photoscale mul  
                  ]
           /Border [ 0 0 0]   % [0 0 0 ] = none; [0 0 2] = debug 
           /Color [ .7 0 0 ]
           /Action <</Subtype /URI /URI cururlname>>
           /Subtype /Link
           /ANN                            % annotation type
           pdfmark                        % call pdf operators  
 
} def


%%%%%%%%%%% data for quantization figures %%%%%%%


/raw 
[0.0198613 3.75812 0.0300583 0.968559 0.0400088 0.625545 0.0500071
0.473332 0.0598378 0.508493 0.0701048 0.618866 0.080067 0.574973
0.0900779 0.328987 0.0999211 0.358846 0.109939 0.13398 0.119912
0.183206 0.129936 0.374792 0.14006 0.286128 0.150091 0.206733
0.160075 0.190605 0.169949 0.196913 0.17999 0.136811 0.189984
0.223428 0.200178 0.130515 0.209919 0.279305 0.21986 0.179522
0.230087 0.167779 0.239816 0.127177 0.250051 0.18394 0.260079 0.22457
0.269779 0.120137 0.279989 0.142624 0.290027 0.124499 0.299737
0.111797 0.309994 0.123014 0.319982 0.268029 0.329976 0.207562
0.339971 0.0887317 0.349912 0.141557 0.359975 0.0943557 0.369923
0.0895733 0.379933 0.198241 0.389968 0.204985 0.399985 0.107935
0.409949 0.0945179 0.419974 0.125101 0.429965 0.0976423 0.440214
0.0904647 0.449999 0.108261 0.459981 0.0657491 0.470024 0.206909
0.479727 0.0390659 0.489996 0.0464662 0.50005 0.208427 0.509765
0.0436721 0.520046 0.0589122 0.53008 0.0933284 0.540058 0.122129
0.550131 0.108932 0.55981 0.0608129 0.570111 0.0552627 0.579854
0.0621947 0.590107 0.139442 0.59986 0.0498109 0.610232 0.103161
0.619883 0.129033 0.630016 0.0849617 0.640199 0.0601919 0.649749
0.0799222 0.660031 0.0541167 0.669983 0.113527 0.679712 0.0480973
0.690061 0.089419 0.700078 0.107595 0.709859 0.0710718 0.720131
0.041575 0.730196 0.123105 0.740089 0.0584097 0.749848 0.0861482
0.75993 0.0515622 0.769942 0.0761598 0.779974 0.118253 0.789996
0.0481484 0.799986 0.0874933 0.809957 0.0973124 0.820064 0.0534035
0.830362 0.025697 0.83973 0.0399598 0.850034 0.049165 0.859829
0.0851767 0.869827 0.0404494 0.880229 0.0435597 0.889938 0.0723645
0.899933 0.0190775 0.910168 0.0616833 0.919942 0.0725692 0.929991
0.0399983 0.940013 0.102806 0.950018 0.0518368 0.960034 0.0318331
0.970059 0.0823362 0.980036 0.0436783 0.989837 0.0463608 1.00013
0.0562829
  ] def



/ex54 [

5.87906 19.9758 5.38078 23.2179 6.61461 22.45 6.48865 23.8991
7.79373 21.6975 7.66747 18.3412 7.16927 15.7147 7.0433 23.5588
7.89268 23.6885 6.44363 24.0582 6.31744 20.4902 5.81917 24.1383
7.16713 21.0382 6.66901 18.9723 6.54259 11.4618 6.04431 22.422
6.99837 23.9206 7.72186 17.6438 7.22366 19.559 7.0974 19.865 8.16101
21.0954 7.66296 21.6132 8.38593 23.3011 8.45734 21.8227 8.33099
20.4936 7.83295 23.6901 9.12148 21.6428 8.99521 24.1041 9.0123
22.5552 10.0761 24.016 9.94987 23.6423 9.4516 18.8 10.3011 18.3618
10.175 15.7533 9.67651 15.8403 10.7406 22.2248 11.2952 23.4363
8.38531 18.1067 9.44916 24.1021 8.95065 19.521 8.82462 16.3613
8.32649 22.8011 9.67415 22.9247 9.1758 23.1169 9.04961 18.7033
10.0041 21.3686 9.50554 20.3098 9.37965 23.1915 10.229 20.7535
9.73083 24.3928 10.7951 23.4553 10.6687 20.0753 10.1704 22.7069
10.9646 20.4496 10.8385 20.1683 11.4042 19.4907 12.0175 23.4256
11.5192 22.1005 12.5835 16.0818 12.4572 16.8864 11.9588 13.1062
12.809 19.7136 12.6826 18.5011 12.1842 20.9156 13.2483 19.5923
13.1218 24.0439 13.8034 21.8302 10.6676 23.761 10.8927 22.8588 11.957
21.8607 11.4587 19.2204 11.3322 17.3188 12.5117 19.7264 12.0132
20.9341 13.1763 23.3152 13.2472 20.7672 13.1206 23.1287 13.4724
23.3126 13.3461 23.9651 13.9117 18.537 13.8022 22.5502 14.2414
20.9416 14.4669 13.1742 13.1752 23.9257 13.6145 24.4108 13.8398
22.6699
    ] store



/ex54good [

6.54259 11.4618
11.9588 13.1062
14.4669 13.1742  

10.175 15.7533 
9.67651 15.8403 

10.0041 21.3686 
] store


/ex54orig [ 9.88396 24.4257 ] store

/ex54want [ 10 0 ] store











/shook [
0.00934937 1.51076 0.0210324 0.978672 0.0312886 0.477679 0.0406482
0.318167 0.0493669 0.337353 0.0617085 0.203131 0.0692016 0.259957
0.0798052 0.229666 0.0885358 0.271299 0.100559 0.1726 0.109939
0.13398 0.118677 0.119296 0.131049 0.187404 0.140698 0.134313
0.149444 0.129195 0.158846 0.106101 0.170589 0.0965049 0.179351
0.0914561 0.189653 0.129042 0.201417 0.0546426 0.210828 0.108576
0.218951 0.100261 0.230727 0.120773 0.241057 0.103841 0.24984
0.0973585 0.259094 0.114175 0.268537 0.0808775 0.281232 0.051974
0.289386 0.0641827 0.301193 0.0942731 0.310907 0.0954356 0.31907
0.0730116 0.330889 0.0677774 0.339699 0.0797174 0.350554 0.0727672
0.360616 0.0859002 0.369923 0.0895733 0.379679 0.0823565 0.391137
0.0758395 0.399965 0.0916116 0.411197 0.0716472 0.419389 0.052739
0.430883 0.0744991 0.441523 0.0643956 0.450642 0.0651337 0.461231
0.0500311 0.470357 0.0682797 0.479727 0.0390659 0.491163 0.0464662
0.500383 0.0701265 0.509765 0.0436721 0.520046 0.0589122 0.529436
0.0621049 0.540979 0.065531 0.549818 0.0659652 0.55981 0.0608129
0.570111 0.0552627 0.579854 0.0621947 0.589296 0.0497526 0.59986
0.0498109 0.610207 0.0454799 0.620493 0.0516502 0.630849 0.0588497
0.639051 0.034206 0.649639 0.0456603 0.660009 0.0522574 0.670628
0.0426991 0.679712 0.0480973 0.69034 0.0477716 0.699467 0.0308037
0.711012 0.0686215 0.720131 0.041575 0.729513 0.0498212 0.739846
0.0430787 0.750499 0.0405623 0.76086 0.0438831 0.770257 0.0497878
0.780553 0.0441616 0.789662 0.0457397 0.800267 0.0325654 0.809451
0.0440074 0.820078 0.0403837 0.830362 0.025697 0.840997 0.0332166
0.85014 0.0337785 0.860449 0.0360605 0.869889 0.015046 0.880467
0.0360463 0.890767 0.0317396 0.899933 0.0190775 0.910273 0.0316686
0.919661 0.0263476 0.929956 0.0388174 0.939357 0.032368 0.949701
0.027215 0.960034 0.0318331 0.970334 0.0351219 0.979745 0.0379512
0.990337 0.0386641 1.00065 0.0439439
   ] store





%%%%%%%%%%%%% ordinary tracking figures 

/figureoneauto {


 /figadvance 13 store

   save /snap2 exch store xpos 2 add ypos figadvance sub translate
   % /linestring 20000 string def 



   figure1
   snap2 restore 

   /ypos ypos figadvance sub yinc sub 

% 7 add  

store  % temp bug removal?
   
   } store



/figure1aaa 

{



save /snap1aaa exch store

11 32.6 translate % huh?



% BIG GREEN A
% =================================================================


 % (C:\\windows\\desktop\\gonzo\\gonzo.ps) run  % use internal gonzo
%  (A:\\gonzo.ps) run  % use external gonzo

% gonzo begin
% ps.util.1 begin
% nuisance begin


gsave aqua 0.3 setgray
font6
-3 5 (desired\ncharacter) cc
20.2 5 (best\npixel fit) cc


grestore

/font1 /Helvetica-Bold 60 gonzofont

% 100 100 2 setgrid

0.12 dup scale 

0 0 mt 80 pu 60 pr 80 pd closepath

 0.75 1 0.75 setrgbcolor fill 






newpath








 0 1 0 setrgbcolor 

0 0 mt 80 pu 60 pr 80 pd closepath
0.8 setlinewidth stroke


newpath
line1
[{0 0 mt 80 u}10 6  ] xrpt
[{0 0 mt 60 r}10 8  ] yrpt


0.4 dup dup setrgbcolor

/font2 /Helvetica-Bold [90 0 0 112 0 0] gonzofont

font2

30 0 (A) cc

%%% second figure

85 0 translate % was 90



% character is 0.4 0.4 0.4 hardwired
% background is 0.75 1 0.75 


/adjgam { 4 mul floor cvi [0 0.33 0.66  1] exch get } store



/makeshade {   %adjgam


/val exch store

    1 val sub -0.35 mul 0.75 add
    1 val sub  -0.6 mul 1 add
    1 val sub -0.35 mul 0.75 add  setrgbcolor


 0 0 mt 10 pu 10 pr 10 pd closepath fill 
 10 0 translate

           } store

gsave
0 70 translate

[ 0.999 0.999 0.100 0.100 0.999 0.999 ] { makeshade} forall

-60 -10 translate 

[ 0.999 0.800 0.007 0.007 0.800 0.999 ] {makeshade} forall

-60 -10 translate
[ 0.999 0.559 0.189 0.189 0.559 0.999 ] {makeshade} forall

-60 -10 translate

[ 0.999 0.282 0.432 0.432 0.282 0.999 ]{makeshade} forall
-60 -10 translate

[ 0.969 0.037 0.632 0.632 0.037 0.969 ]{makeshade} forall
-60 -10 translate

[ 0.779 0.000 0.000 0.000 0.000 0.779 ]{makeshade} forall
-60 -10 translate

[ 0.464 0.144 0.649 0.649 0.144 0.464 ]{makeshade} forall
-60 -10 translate

[ 0.182 0.439 0.999 0.999 0.439 0.182 ]{makeshade} forall


grestore




 0 1 0 setrgbcolor 

0 0 mt 80 pu 60 pr 80 pd closepath
0.8 setlinewidth stroke




newpath
line1
[{0 0 mt 80 u}10 6  ] xrpt
[{0 0 mt 60 r}10 8  ] yrpt


snap1aaa restore

} store








/figure1x {  


    


     /circproc {gsave 
                /arraynum exch store 
                /circvalue exch store 
                /circshade exch store translate

 newpath       


                0 0 0.8 0 360 arc
    

    /font1 /StoneSans-Bold 0.9 gonzofont
    /font2 /Helvetica-Bold 0.7 gonzofont

    gsave circshade setgray fill grestore

    line2 0.33 setgray stroke

    font1

 0 -0.3 circvalue cc  
   newpath
    black font2 



0 -1.5 arraynum cc 

 0 0 (              ) cc    % eliminate strange string reuse bug?


         grestore                 } store




 %  32 9 showgrid


line1 



[{0 0  mt 1 2 rlineto 1 -2 rlineto stroke} 4 8 ] xrpt
[{1 2 mt 2 2 rlineto 2 -2 rlineto stroke} 8 4 ] xrpt
[{3 4 mt 4 2 rlineto 4 -2 rlineto stroke} 16 2 ] xrpt
7 6 mt 8 2 rlineto 8 -2 rlineto stroke


{
[-null- (52)  (51) (41)  
 (50) (30) (31) (40)  
(21) (42) (10) (22) (02) (00) (20) (32) 

(01) (12) (11) (21)]
} pop


0 8 0.85 ( ) (00) circproc

15 8 0.7 (52)(01) circproc

7  6 0.7 (51) (02) circproc
23 6 0.7 (41) (03) circproc




3  4 0.75 (50) (04) circproc
11 4 0.75 (30) (05) circproc
19 4 0.75 (31) (06) circproc
27 4 0.75 (40) (07) circproc

1  2 0.75 (21) (08) circproc
5  2 0.75 (42) (09) circproc
9  2 0.75 (10) (10) circproc
13  2 0.75 (22) (11) circproc
17  2 0.75 (02) (12) circproc
21  2 0.75 (00) (13) circproc
25  2 0.75 (20) (14) circproc
29  2 0.75 (32) (15) circproc

0 -.3 0.75 (01) (16) circproc
2 -.3 0.75 (12) (17) circproc
4 -.3 0.75 (11) (18) circproc
6 -.3 0.75 (21) (19) circproc
8 -.3 0.85 ( ) (20) circproc
10 -.3 0.85 ( ) (21) circproc
12 -.3 0.85 ( ) (22) circproc
14 -.3 0.85 ( ) (23) circproc
16 -.3 0.85 ( ) (24) circproc
18 -.3 0.85 ( ) (25) circproc
20 -.3 0.85 ( ) (26) circproc
22 -.3 0.85 ( ) (27) circproc
24 -.3 0.85 ( ) (28) circproc
26 -.3 0.85 ( ) (29) circproc
28 -.3 0.85 ( ) (30) circproc
30 -.3 0.85 ( ) (31) circproc





 font2 0 5.85 ((reserved)) cc

26.5 7.6 (xx = array address)cc


 0 0 (                  ) cc  % get rid of string bug


  } store






/figure1f {

 

save /snap3 exch def

/linestring 1000 string store


9 1 translate % position on page


%%%%%%%%%%%%%%%%%%%



/sdat
[
11.98 10.02 11.38 10.47 10.7 10.13 11.65 10.41 11.68 10.1 11.82 10.38 11.07 10.13 11.13 10.16 10.95 10.44 9.97 10.1 11.53 10.04 12.0 10.28 11.35 10.49 11.2 9.47 9.24 9.75 10.3 10.03 11.42 9.65 9.91 9.41 8.61 9.69 11.01 9.62 12.3 9.38 11.13 9.74 9.76 9.4 8.93 9.68 9.77 9.72 10.33 10.0 9.66 9.34 9.69 9.62 8.33 9.66 9.83 9.93 11.37 9.69 11.07 9.97 9.71 9.55 9.49 9.82 9.94 9.58 7.78 9.86 9.1 10.14 10.73 9.9 10.17 10.17 10.74 9.76 8.24 9.52 6.75 9.8 9.16 10.08 7.76 9.83 8.03 10.11 11.37 10.15 9.75 9.46 9.43 9.74 7.95 9.77 9.14 10.05 11.05 9.81 10.8 9.48 11.96 9.24 8.28 9.52 7.41 9.8 7.55 9.83 8.36 10.11 7.94 9.45 8.08 9.73 7.69 9.49 5.22 9.77 7.5 10.05 8.58 9.8 8.27 10.08 8.46 9.43 7.47 9.71 7.87 9.74 8.53 10.02 11.58 9.76 11.4 9.7 11.83 9.66 11.44 9.7 9.71 9.97 10.87 10.25 11.64 10.01 9.81 9.63 8.69 9.91 8.75 9.95 9.08 10.22 12.21 10.5 11.57 10.26 10.94 9.57 10.73 9.85 8.71 9.88 9.89 10.16 11.86 9.97 9.43 9.91 8.8 9.94 9.59 10.22 9.57 9.57 9.77 9.85 8.6 9.6 6.62 9.88 8.63 10.16 8.75 9.92 8.55 10.19 11.42 10.47 9.09 9.54 8.28 9.82 7.82 9.85 8.58 10.13 11.75 9.89 12.49 10.44 11.69 9.79 11.75 10.03 12.35 9.65 10.9 9.97 12.31 8.99 12.23 9.24 12.49 9.13 11.21 9.44 11.38 8.83 8.94 9.1 9.54 9.38 9.94 9.14 8.7 9.42 12.04 9.45 11.01 8.76 9.37 9.04 10.72 9.32 8.15 9.08 7.71 9.35 9.4 9.39 9.61 9.01 9.49 9.33 11.21 9.6 11.11 9.1 9.92 9.04 8.03 9.07 8.13 9.35 11.33 9.63 9.08 9.39 11.48 8.97 7.58 9.01 8.67 9.29 8.24 9.05 7.17 9.32 9.78 9.6 11.66 8.67 10.44 8.95 11.85 8.71 8.89 8.98 8.86 9.26 11.78 9.54 9.95 9.3 11.03 9.28 12.11 9.18 8.21 9.22 8.95 9.49 12.44 8.97 8.52 9.25 7.16 9.53 9.52 9.81 10.33 9.57 10.16 8.88 8.46 9.15 6.04 9.19 5.59 9.47 9.3 9.74 9.28 9.23 6.83 9.5 8.24 9.78 12.24 10.06 11.58 9.09 10.43 8.85 7.67 9.13 8.34 9.4 8.25 9.16 6.68 9.44 9.05 9.72 11.67 9.49 9.74 9.53 11.95 9.8 12.31 9.84 9.26 9.15 9.79 8.91 6.2 9.19 6.45 9.46 10.28 9.74 8.69 9.22 6.67 9.5 8.63 9.78 11.48 9.54 8.31 8.85 5.26 9.12 6.86 9.4 11.27 9.68 10.02 8.88 4.95 9.16 3.11 9.44 7.46 9.71 10.29 9.2 7.54 9.47 8.28 9.75 11.89 10.03 8.69 9.06 10.53 9.34 9.57 8.82 5.65 9.1 5.75 9.37 9.75 9.65 8.54 9.13 6.32 9.41 8.24 9.69 11.18 9.72 9.94 9.09 11.48 9.03 10.96 9.07 9.26 9.64 12.02 9.54 8.09 9.3 7.86 9.58 7.97 9.62 9.3 9.89 12.24 9.65 9.16 9.24 9.82 9.52 8.92 9.28 7.6 9.55 9.84 9.83 11.54 9.64 8.44 9.3 8.73 9.58 9.73 9.33 8.09 9.61 9.85 9.89 9.83 8.96 7.54 9.24 8.82 9.51 6.32 9.27 5.18 9.55 8.63 9.83 7.76 9.59 8.59 9.86 10.04 9.17 6.6 9.21 6.82 9.49 8.43 9.25 6.3 9.52 8.32 9.8 10.84 9.56 11.78 9.55 10.32 9.52 11.98 9.14 12.38 9.41 11.8 9.73 12.24 9.39 10.69 9.38 12.33 9.94 9.9 9.64 11.25 8.43 10.49 8.71 9.45 8.74 9.96 9.02 11.36 9.06 11.21 9.0 11.02 8.71 9.4 8.74 10.34 9.02 11.9 8.37 12.24 8.64 8.73 8.68 10.53 8.96 9.35 8.71 9.37 8.99 11.52 8.34 9.66 8.65 11.45 8.97 12.43 8.95 11.22 8.61 9.75 8.88 11.17 9.16 10.05 8.92 9.83 9.2 12.36 9.47 10.43 8.54 9.7 8.82 7.73 8.86 8.45 9.13 10.5 8.89 9.35 9.17 12.32 8.76 8.77 8.79 9.33 8.83 8.97 9.11 10.16 8.58 7.91 8.85 9.1 9.13 10.02 8.89 9.3 9.17 8.44 8.51 6.84 8.79 9.12 9.07 6.66 8.83 6.81 9.1 9.71 9.14 9.89 8.45 9.46 8.73 9.45 8.49 6.83 8.76 8.05 9.04 9.41 8.8 8.51 9.08 11.68 9.07 11.94 8.7 11.47 8.73 11.83 9.01 11.46 9.31 11.69 8.69 9.44 8.97 10.24 9.28 9.95 8.94 9.7 9.22 12.25 9.5 9.8 8.97 10.86 9.24 9.96 8.63 8.74 8.9 7.76 8.94 8.0 9.22 9.91 9.25 11.05 8.56 10.74 8.84 9.99 8.6 7.67 8.88 8.87 9.16 9.33 8.91 8.52 9.19 10.92 9.47 11.41 8.85 11.84 9.13 11.39 8.99 12.23 8.46 10.76 8.43
% patch dots follow

4.3 9.3
5 9.4
6.3 8.8
6.5 9.7
5.8 9.7
6 9.2
6 9.6
7.2 8.8
7.2 9
7.2 9.7
7.3 9.9
8 8.6
9 8.5
10.5 9.6
10.7 10
11 10.3

 ] store

% Actual dots plotted = 334 + patches.

% 100 100 10 setgrid  % only standalone



1.15 dup scale

10 10 showgrid

0.4 0.8 0.8 setrgbcolor 1 setlinecap 1 setlinejoin
line3 0 0 mt 10 u 10 r 10 d 10 l

0.25 0.25 0.25 setrgbcolor

gsave 0 0 mt 0 10 rlineto 10 0 rlineto 0 -10 rlineto closepath clip

gsave -3.2 -0.8 translate 0.87 dup scale

0 2 sdat length 2 sub {/cposn exch store

sdat cposn 1 add get 
sdat cposn get   


1 0 0 setrgbcolor
0.2 setgray   0.9 settint 0.40 setgray

     mt dot

} for
grestore
grestore

/cstretch 0 store
/sstretch 0.015 store


black 


/font1 /Helvetica-Bold 0.9 gonzofont
font1






5 -1.3 (amplitude) cc

gsave -0.8 5 translate 90 rotate
0 0 (distortion) cc
grestore








ypos snap3 restore /ypos exch def  
} def

%%%%%%



/figure1 {

 /figadvance 10 store


save /snap3 exch def

/linestring 1000 string store

%%%%%%%%%%%%%%%%%%%

electronics begin

bestgray


 -0.0 -2.6 translate  % reposition on page

% 0 0 10 setgrid  already there
 %  33 14 showgrid


/cstretch 0.02 def
/sstretch 0.0 def
/kern 0.1 def
/yinc 1.0 def

/red {0 settint} def
/blue {0.67 settint} def
/purple {0.75 settint} def

/font0 /Helvetica-Bold [1.2 0 0 1 0 -0.2] gonzofont

/font0 /Helvetica-bold [1 0 0 0.8 0 0 ] gonzofont

/font1 /Helvetica 0.75 gonzofont
/font4 /Helvetica 0.6 gonzofont
/font3 /Helvetica-Bold 0.75 gonzofont
/font2 /Helvetica-Oblique 0.75 gonzofont
/font5 /Helvetica-Bold 1.1 gonzofont
/font6 /Helvetica [2 0 0 1.4 0 0] gonzofont
/font7 /Helvetica-Oblique 0.75 gonzofont
/font8 /Symbol 0.75 gonzofont

/font9 /Helvetica [.6 0 0 .6 -.15 .4] gonzofont

/font- /Helvetica-Bold [0.4 0 0 0.55 0 0] gonzofont 

/kern 0.15 def
/tabs [16.5] def
/txtwide 29 def
font1

/tabs [17.5] def

font1

/yinc 0.9 def
line1


bestgray
black










22 6 mt 3 d 5 rx circ1
    26 3 mt rarrow

21 6 mt 1 d 6 rx circ1
    26 5 mt rarrow

20 6 mt 1.5 d 4 rx 2 ux 3 r circ1
    26 6.5 mt rarrow


19 6 mt 2 d 5.5 rx 4 ux 2.5 r circ1
    26 8 mt rarrow



17 10 mt 1 u 5 l 8 d 4 l circ1
     9.5 3 mt rarrow  % low priority




18 6 mt 1.5 d ground


17 6 mt 2.5 d 7 lx  1 u 2 l circ1
       9.5 4.5 mt rarrow

16 6 mt 2 d 5.5 lx 2 u 2.5 l circ1
       9.5 6 mt rarrow

15 6 mt 1.5 d 4 lx 3 u 3 l circ1
       9.5 7.5 mt rarrow

14 6 mt 1 d 2.5 lx 4 u 3.5 l circ1
      9.5 9 mt rarrow









21 10 mt 2 ux 3 r 2 d 3 r circ1
     26 13 mt rarrow

20 10 mt 2.5 u 4.5 r 1 d 2.5 r circ1
     26 11.5 mt rarrow

19 10 mt 3 u 8 r circ1
     26 10 mt rarrow

18 10 mt 1.5 u circ1   % +5v



16 10 mt 3 ux circ1
     16 12.3 mt darrow

15 10 mt 2 ux 7 l circ1
      9.5 12 mt rarrow


14 10 mt 1.5 ux 2.5 l 1 d 3.5 l circ1
       9.5 10.5 mt rarrow



beige

14 6 moveto
18
(MS28D-05X)
(IN1 IN0 XIN IN6 +5V /DA /DB /DC NC)
(IN2 IN3 IN4 IN5 GND DA DB DC SYNC)

dipdraw

font4


22 10.65 (NC) cc


font1
18 12 (+5V) cc

  

font1

/overstrikeht 0.55 store

27.7 13 0.3 sub  (Delta "A" complement) cl
27.7 11.5 0.3 sub (Delta "B" complement) cl
27.7 10 0.3 sub (Delta "C" complement) cl


27.7 8 0.3 sub  (Delta "A" true output) cl
27.7 6.5 0.3 sub (Delta "B" true output) cl
27.7 5 0.3 sub (Delta "C" true output) cl
27.7 3  0.3 sub (Zero degrees sync) cl



16 14.7 (10 MHz per 60 Hz) cc
16 13.8 (input clock ref) cc

7.3 2.7 (high ~|jOR|j~ 0-100 amp bit 6) cr
7.3 4.2 (high ~|jOR|j~ 0-100 amp bit 5) cr
7.3 5.7 (high ~|jOR|j~ 0-100 amp bit 4) cr
7.3 7.2 (slew up ~|jOR|j~ 0-100 amp bit 3) cr
7.3 8.7 (slew down ~|jOR|j~ 0-100 amp bit 2) cr
7.3 10.2 (step up ~|jOR|j~ 0-100 amp bit 1) cr
7.3 11.7 (step down ~|jOR|j~ 0-100 amp bit 0) cr




end
ypos snap3 restore /ypos exch def  
} def


%%%%%%%%%%%%%%



/figure2 {

 /figadvance 10 store


save /snap3 exch def

/linestring 1000 string store

%%%%%%%%%%%%%%%%%%%

electronics begin

bestgray

line1

0 -1 translate  % reposition on page

% 0 0 10 setgrid  already there
%    33 14 showgrid

/onecoil {  0 0 mt 1 pr 8 hcoil 0.9 r} store


/delta {gsave translate 
        gsave onecoil grestore
        gsave 60 rotate onecoil grestore
        gsave 4 6.928 translate -60 rotate onecoil grestore
        0 0 mt circ1  4 7 mt circ1  8 0 mt circ1
         grestore } store


/box35 {gsave /callout exch store translate 0 -1.5 mt 2.5 pl 3 pu 5 pr 3 pd closepath
        gsave 0.8 setgray fill grestore 
        gsave 0.33 setgray line3 stroke grestore 
        black 0 0.1 callout cc grestore} store 

/font1 /Helvetica 0.8 gonzofont
/font2 /Helvetica-Bold 1 gonzofont

/hbd {gsave translate   0 2.5 mt 5 d ground 0 2.5 mt circ1   /yinc 0.9 store
       0 0 mt 3 l 6 r  0 0 (half bridge\ndriver) box35
 grestore }store 



font1

2 3 mt 3 l circ1
1 3 mt rarrow

4 3 mt 5 r 2 d 13 r 2 u

6 7 mt 7 l circ1
1 7 mt rarrow

10 11 mt 11 l circ1
1 11 mt rarrow

  14 11 mt  4 r 1 d
  11 7 mt 1 r 4 d 2 r


 14 3 delta

4.5 3 hbd
8 7 hbd
11.5 11 hbd




font2

-2.3 2.6 (DC) cc
-2.3 6.6 (DA) cc
-2.3 10.6 (DB) cc

14.5 7 (a) cc
21.4 7 (b) cc
18 1.7 (c) cc

3.5 5.3 (+v) cc
6.8 9.3 (+v) cc
10.4 13.3 (+v) cc

13.5 1.7 (TA) cc
23.3 1.7 (TC) cc

18 11.5 (TB) cc





end

ypos snap3 restore /ypos exch def  
} def

%%%%%%% core defs for magsin plots




%%%%%%% core defs for magsin plots

/coredefs {

/shakendelta28 [
[ [868      0    0 1730    0      0     0 868] 0.000000 0.0000000 3472 ]


% shortened



[ [103 1242 151    63 211 1001 698   3] 0.0439439 1.000650 3472 ]

] def


/aa mark  shakendelta28 {0 get 0 get 2 mul} forall ] store  % double a
/bb mark  shakendelta28 {0 get 1 get} forall ] store
/cc mark  shakendelta28 {0 get 2 get} forall ] store
/dd mark  shakendelta28 {0 get 3 get} forall ] store
/ee mark  shakendelta28 {0 get 4 get} forall ] store
/ff mark  shakendelta28 {0 get 5 get} forall ] store
/gg mark  shakendelta28 {0 get 6 get} forall ] store
/hh mark  shakendelta28 {0 get 7 get 2 mul } forall ] store  % double h


% aa == bb == cc == dd == ee == ff == gg == hh ==


/amplitude 53 store

/delaypattern [

(aa)(bb)(cc)(dd)(ee)(ff)(gg)
(hh)(gg)(ff)(ee)(dd)(cc)(bb)

(aa)(bb)(cc)(dd)(ee)(ff)(gg)
(hh)(gg)(ff)(ee)(dd)(cc)(bb)

(aa)(bb)(cc)(dd)(ee)(ff)(gg)
(hh)(gg)(ff)(ee)(dd)(cc)(bb)

(aa)(bb)(cc)(dd)(ee)(ff)(gg)
(hh)(gg)(ff)(ee)(dd)(cc)(bb)

(aa)(bb)(cc)(dd)(ee)(ff)(gg)
(hh)(gg)(ff)(ee)(dd)(cc)(bb)

(aa)(bb)(cc)(dd)(ee)(ff)(gg)
(hh)(gg)(ff)(ee)(dd)(cc)(bb)


              ] store



/portpattern [

<E0>  <A2><2B>  <07>  <2B><A2><2B>  <E0>  <A2><2B><A2>  <E0>  <A2><2B>
<E0> pop <07>  <2B><69>  <E0>  <69><2B><69>  <E0>  <2B><69><2B>  <07>  <2B><69>
<E0>  <69><45>  <07>  <45><69><45>  <E0>  <69><45><69>  <E0>  <69><45>

<E0> pop <07>  <45><C4>  <E0>  <C4><45><C4>  <E0>  <45><C4><45>  <07>  <45><C4>
<E0>  <C4><64>  <07>  <86><C4><86>  <E0>  <C4><86><C4>  <E0>  <C4><86>
<E0> pop <07> <86><C2>  <E0>  <C2><86><C2>  <E0>  <86><C2><86>  <07>  <86><C2>

] store


% 100 100 10 setgrid
% 30 60 showgrid

/hscale 30  3472 12 mul div  store


/vscale 4 store


/phasea {gsave  translate

/port 0 store

line1 
0 0 mt

0 1 portpattern length 1 sub {/posn exch store


portpattern posn get  0 get
 2 12 string cvrs (10000000) exch mergestr 

100 string cvs    % dereference?


dup length 1 sub port sub get 48 sub   /state exch store


delaypattern posn get cvn load amplitude get  /stall exch store




currentpoint exch pop cvi /nowat exch store

nowat 0 eq state 0 ne and {0 vscale rlineto} if
nowat 0 ne state 0 eq and {0 vscale neg rlineto} if

stall hscale mul 0 rlineto




} for


stroke

 grestore} store



%%%%%%%%%

/phaseb {gsave  translate

/port 1 store

/prev false store

line1 
0 0 mt

0 1 portpattern length 1 sub {/posn exch store


portpattern posn get  0 get
 2 12 string cvrs (00000000) exch mergestr 

dup length 1 sub port sub get 48 sub   /state exch store


delaypattern posn get cvn load amplitude get  /stall exch store




currentpoint exch pop cvi /nowat exch store

nowat 0 eq state 0 ne and {0 vscale rlineto} if
nowat 0 ne state 0 eq and {0 vscale neg rlineto} if

stall hscale mul 0 rlineto




} for


stroke

 grestore} store


%%%%%%%%%



/phasec {gsave  translate

/port 2 store

line1 
0 0 mt

0 1 portpattern length 1 sub {/posn exch store


portpattern posn get  0 get
 2 12 string cvrs (00000000) exch mergestr 

dup length 1 sub port sub get 48 sub   /state exch store


delaypattern posn get cvn load amplitude get  /stall exch store




currentpoint exch pop cvi /nowat exch store

nowat 0 eq state 0 ne and {0 vscale rlineto} if
nowat 0 ne state 0 eq and {0 vscale neg rlineto} if

stall hscale mul 0 rlineto




} for


stroke

 grestore} store


/halfwave {gsave  translate

/port 3 store

line1 1 0 0 setrgbcolor
0 0 mt

0 1 portpattern length 1 sub  {/posn exch store


portpattern posn get  0 get
 2 12 string cvrs (00000000) exch mergestr dup length 1 sub port sub get 48 sub cvi  


/state exch store


delaypattern posn get cvn load amplitude get  /stall exch store




currentpoint exch pop cvi /nowat exch store

% state ==
% nowat ==
% stall ==



nowat 0 eq state 0 ne and {0 vscale rlineto} if
nowat 0 ne state 0 eq and {0 vscale neg rlineto} if

stall hscale mul 0 rlineto

% currentpoint == ==
% (\n) print flush


} for



stroke

 grestore} store


%%%%%%%%%%%%

/AminusC  {gsave  translate

/Cport 2 store
/Aport 0 store


line1 
0 0 mt          

0 1 portpattern length 1 sub   {/posn exch store


portpattern posn get  0 get
 2 12 string cvrs (00000000) exch mergestr dup length 1 sub Cport sub get 48 sub cvi  
2 div /Cstate exch store

portpattern posn get  0 get
 2 12 string cvrs (00000000) exch mergestr dup length 1 sub Aport sub get 48 sub cvi  
2 div /Astate exch store

/nustate Astate Cstate sub  store



delaypattern posn get cvn load amplitude get  /stall exch store



currentpoint pop nustate vscale mul lineto

stall hscale mul 0 rlineto

%  currentpoint == ==
%  (\n) print flush


} for



stroke

 grestore} store

%%%%%%%%%%%


/BminusA  {gsave  translate

/Bport 1 store
/Aport 0 store

line1 
0 0 mt

0 1 portpattern length 1 sub   {/posn exch store


portpattern posn get  0 get
 2 12 string cvrs (00000000) exch mergestr dup length 1 sub Aport sub get 48 sub cvi  
2 div /Astate exch store

portpattern posn get  0 get
 2 12 string cvrs (00000000) exch mergestr dup length 1 sub Bport sub get 48 sub cvi  
2 div /Bstate exch store

/nustate Bstate Astate sub  store



delaypattern posn get cvn load amplitude get  /stall exch store



currentpoint pop nustate vscale mul lineto




stall hscale mul 0 rlineto

 % currentpoint == ==
 % (\n) print flush


} for



stroke

 grestore} store

%%%%%%%%%%%

/CminusB  {gsave  translate

/Cport 2 store
/Bport 1 store

line1 
0 0 mt

0 1 portpattern length 1 sub   {/posn exch store


portpattern posn get  0 get
 2 12 string cvrs (00000000) exch mergestr dup length 1 sub Bport sub get 48 sub cvi  
2 div /Bstate exch store

portpattern posn get  0 get
 2 12 string cvrs (00000000) exch mergestr dup length 1 sub Cport sub get 48 sub cvi  
2 div /Cstate exch store

/nustate Cstate Bstate sub  store



delaypattern posn get cvn load amplitude get  /stall exch store



currentpoint pop nustate vscale mul lineto




stall hscale mul 0 rlineto




} for



stroke

 grestore} store


} def

%%%%%%%%%%%








%%%%%%%%%%%%%%%%%%%%%%%

/figure3 {/figadvance 10 store
save /snap3 exch def
/linestring 1000 string store
%%%%%%%%%%%%%%%%%%%
electronics begin
bestgray
line1
coredefs
-3.8 -1.8 translate  % position on page
% 30 12 showgrid
/vscale 3 store

1 0 1 setrgbcolor


1 1 1 setrgbcolor  % nasty bug dont know why  dribbles down
0 10.3 phaseb

1 0 1 setrgbcolor

0 9 phasea
 
0 0 phaseb
0 4.5 phasec


30 0 mt 3 u % patch end


black
/font2 /Helvetica-Bold 1 gonzofont
-1 1 (DC) cr   % we have a cc conflict!!!!
-1 5.5 (DB) cr
-1 10 (DA) cr
% halfwave
% AminusC
% BminusA
% CminusB
end
ypos snap3 restore /ypos exch def  
} def

%%%%%%%%%%%%%%%%%%%%%%%




/figure4 {/figadvance 15 store
save /snap3 exch def
/linestring 1000 string store
%%%%%%%%%%%%%%%%%%%
electronics begin
bestgray
line1
coredefs
-3 -0.5 translate  % position on page
% 30 12 showgrid
/vscale 4 store

%0 9 phasea   1 0 0 setrgbcolor  30 0 mt 3 u % patch end
%0 0 phaseb
%0 4.5 phasec


1 0 1 setrgbcolor
0 9.2 2 add AminusC
0 0.2 BminusA
0 4.7 1 add CminusB
black


/font2 /Helvetica-Bold 1 gonzofont
/overstrikeht 0.85 store
-1 0 (DC - DA) cr   % we have a cc conflict!!!!
-1 4.5 1 add (DB - DC) cr
-1 9 2 add (DA - DB) cr

% halfwave
% AminusC
% BminusA
% CminusB
end
ypos snap3 restore /ypos exch def  
} def




/figure5 {
save /snap3 exch def
/linestring 1000 string store
%%%%%%%%%%%%%%%%%%%
electronics begin

/circ1b {gsave currentpoint newpath 0.20 0 360 arc % whitefill

gsave beige 0.88 setgray fill grestore black
line1 stroke grestore} def %for circle



bestgray
line1
coredefs
-4.5 -1  translate  % position on page
% 30 12 showgrid


       /font2 /Helvetica-Bold 1 gonzofont
       /overstrikeht 0.70 store
       /yinc 1.2 store

/anet {gsave translate  

       0 6 mt 1.5 r 6 d 1.5 l circ1b  0 6 mt circ1b
       1.5 1.5 vresistor
       1.5 4.5 vresistor
       1.5 3 mt dot
       1.5 3 mt 1.5 r circ1b

       font2   
       -0.7 5.5 (DA) cr   % no cc here!
       -0.7 -0.5 (D|oB|o) cr
       font1
        3.8 3.5 (phase a\noutput) cl

     grestore } store

/bnet {gsave translate  

       0 6 mt 1.5 r 6 d 1.5 l circ1b  0 6 mt circ1b
       1.5 1.5 vresistor
       1.5 4.5 vresistor
       1.5 3 mt dot
       1.5 3 mt 1.5 r circ1b

       font2   
       -0.7 5.5 (DB) cr   % no cc here!
       -0.7 -0.5 (D|oC|o) cr
       font1
        3.8 3.5 (phase b\noutput) cl

     grestore } store

/cnet {gsave translate  

       0 6 mt 1.5 r 6 d 1.5 l circ1b  0 6 mt circ1b
       1.5 1.5 vresistor
       1.5 4.5 vresistor
       1.5 3 mt dot
       1.5 3 mt 1.5 r circ1b

       font2   
       -0.7 5.5 (DC) cr   % no cc here!
       -0.7 -0.5 (D|oA|o) cr
       font1
        3.8 3.5 (phase c\noutput) cl

     grestore } store

-2 0 mt 10.7 pu 33.2 pr 10.7 pd closepath
0.88 setgray fill black


 1.5 3 anet
 12 3 bnet
 22.5 3 cnet

font1 9.5 0.8 (All resistors 2.2K.) cl

end
ypos snap3 restore /ypos exch def  
} def



/figureoneauto { /figadvance 13 store

   save /snap1a exch store xpos 8 add ypos figadvance sub translate
   beige
   figure1
   snap1a restore 
   /ypos ypos figadvance sub yinc sub store
   } store





/figuretwoauto { /figadvance 13 store

   save /snap2a exch store xpos 8 add ypos figadvance sub translate
   beige
   figure2
   snap2a restore 
   /ypos ypos figadvance sub yinc sub store
   } store

/figurethreeauto { /figadvance 11 store

   save /snap3a exch store xpos 8 add ypos figadvance sub translate
   beige
   figure3
   snap3a restore 
   /ypos ypos figadvance sub yinc sub store
   } store




/figurethreeautox { 

   save /snap3ax exch store 
   beige

0 1000 translate
   figure3
   snap3ax restore 
   } store





/figurefourauto { /figadvance 13 store

   save /snap4a exch store xpos 8 add ypos figadvance sub translate
   beige
   figure4
   snap4a restore 
   /ypos ypos figadvance sub yinc sub store
   } store


/figurefiveauto { /figadvance 10 store

   save /snap5a exch store xpos 8 add ypos figadvance sub translate
   beige
   figure5
   snap5a restore 
   /ypos ypos figadvance sub yinc sub store
   } store





/figure2x {



0.50 settint



/font0 /StoneSans-Bold 6 gonzofont  font0



0 1 1 setrgbcolor

10 3 (54) cc


 20 25 showgrid

line3  0 1 1 setrgbcolor
[{-0.5 0 mt 20.5 r} 10 3] yrpt
[{0 -0.5 mt 25.5 u} 10 3] xrpt
0 25 mt 20 r

black

  
0 0 0 setrgbcolor

    0 2 ex54 length 2 sub  {/posn2 exch store
     ex54 posn2 get         
     ex54 posn2 1 add get   
     moveto dot} for

1 0 1 setrgbcolor



    0 2 ex54good length 2 sub  {/posn2 exch store
     ex54good posn2 get         
     ex54good posn2 1 add get   
     moveto dot} for



1 0.5 0 setrgbcolor
ex54want 0 get ex54want 1 get mt dot

1 0 0 setrgbcolor
ex54orig 0 get ex54orig 1 get mt dot



/font1 /StoneSans-Bold 0.9 gonzofont
font1

0.3 0.3 0.3 setrgbcolor

0 -1.5 (0.535) cc
10 -1.5 (0.540) cc
20 -1.5 (0.545) cc

-0.9 0 0.3 sub (0.00%) cr
-0.9 10 0.3 sub(0.05%) cr
-0.9 20 0.3 sub (0.10%) cr


% 11.55 18.2 (= raw quant) cl
% 11.55 17.2 (= best neighbor) cl


/font2 /StoneSans-Bold 1.1 gonzofont
font1

10 -2.7 (Amplitude) cc



gsave -5.2 10 translate 90 rotate
0 0 (Unfiltered  THD  2|j-|j22)cc
grestore 

/yinc 1.2 store

24.3 11.5  (Nearby\nquantized\nAmplitude 54\noptions) cc




      } store

%%%%%%%%% figures for fun with fields %%%%%




/emptyfield {save /mtsnap exch store gsave translate  
showblank {
0 0 mt fieldhi pu fieldwi pr fieldhi pd closepath aqua 0.85 setgray fill} if
black 0.3 setlinewidth
0 -3.5 mt fieldhi 3 add u
-0.5 0 mt fieldwi 1 add r
fieldwi -3.5 mt fieldhi 3 add u
/cstretch 0 store
/sstretch 0 store
/kern 1 store
/font- /Symbol 8.5  gonzofont
/font1 /Helvetica 8.5 gonzofont
font- black
 0 -13(|1(|jx|j=|-|j0|j)) cc
fieldwi -13 (|1(|jx|j=|j|-p|j)) cc
fieldwi 2 div  fieldhi 4 add (|-f|1|j=|j1000|j|jsin|j(|jx|j) volts) cc
fieldwi 2 div  -13 (|1zero volts) cc
gsave -5 fieldhi 2 div translate 90 rotate 0 0 (|1zero volts) cc grestore
gsave fieldwi 12 add fieldhi 2 div translate 90 rotate 0 0 (|1zero volts) cc grestore
grestore mtsnap restore} store





/field [

[0 0.0    % shortened

.0 0 0.0 0.0 0.0 0 0.0 0.0 0.0 0 0.0 0.0
0.0 0 0.0 0.0 0.0 0 0.0 0.0 0.0 0 0.0 0.0 0.0 0 0.0 0.0 0.0 0 0.0 0.0
0.0 0 0.0 0.0 0.0 0 0.0 0.0 0.0 0 0.0 0.0 0.0 0 3.06152e-14
6.12303e-14 9.18455e-14 1.22461e-13]

] store



/adjtint { 

1000 sub abs 1000 div 
0.66667 mul

} store

/plotfield {/sf exch store gsave translate sf dup scale

field length /vsize exch store field 0 get length /hsize exch store

0 1 vsize 1 sub { /vpos exch store


0 1 hsize 1 sub { /hpos exch store

vpos hpos moveto 1 pd 1 pr 1 pu closepath

field vpos get hpos get adjtint  

0.7 1 sethsbcolor

 fill



} for % each horizontal pixel
} for % each row

grestore } store



/w {setlinewidth} store
/n {newpath} store
/m {moveto} store
/l {lineto} store
/S {stroke} store
/sc {setrgbcolor} store

/equipot {

0.149994 w
n
100 216 m
107 216 l
108 212.951 l
109 204.968 l


{
% shortened
104.988 208.47 l
103.99 208.411 l
102.991 208.366 l
101.991 208.337 l
100.991 208.322 l

} pop

S



} store


/grad {





% shortened


n
140 215 m
337.619 193.998 l
338.618 193.951 l
339.617 193.919 l
S

} store





















/figure1 {

/fieldhi 117 store
/fieldwi 241 store

/showblank true store
gsave 0.1 dup scale
-35 5 emptyfield  grestore} store



/figure2 {
/fieldhi 117 store
/fieldwi 241 store
gsave 0.1 dup scale
-35 5 1 plotfield
grestore

/showblank false store
gsave 0.1 dup scale
-35 5 emptyfield  grestore} store

/figure3 {
/fieldhi 117 store
/fieldwi 241 store
gsave 0.1 dup scale
-35 5 1 plotfield
-100 -100 translate
-35 5 translate
equipot

grestore



/showblank false store
gsave 0.1 dup scale
-35 5 emptyfield  grestore} store

/figure4 {
/fieldhi 117 store
/fieldwi 241 store
gsave 0.1 dup scale
-35 5 1 plotfield
-100 -100 translate
-35 5 translate
equipot
grad

grestore



/showblank false store
gsave 0.1 dup scale
-35 5 emptyfield  grestore} store




%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


/burpwide 29.5 store

/burplebox3 {save /burp1 exch store

xpos ypos translate -1 .2 mt 3.5 yinc mul .4 add pd burpwide pr 3.5 yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore

} def

/burplebox2 {save /burp1 exch store

xpos ypos translate -1 .2 mt 2.5 yinc mul .4 add pd burpwide pr 2.5 yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore

} def


/burplebox2.5 {save /burp1 exch store
xpos ypos translate -1 .2 mt 3 yinc mul .4 add pd burpwide pr 3 yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore
} def



/burplebox4 {save /burp1 exch store
xpos ypos translate -1 .2 mt 4.5 yinc mul .4 add pd burpwide pr 4.5 yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore
} def



/burplebox4.5 {save /burp1 exch store
xpos ypos translate    
-1 .2 mt 5 yinc mul .4 add pd burpwide pr 5 yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore
} def





/burplebox5w {save /burp1 exch store
xpos ypos translate


 -1 .2 mt 5.5 yinc mul .4 add pd burpwide pr 5.5 yinc mul .4 add pu closepath
0.9 setgray fill

true {special5 } if

 burp1 restore
} def



/burpcom {save /burpx exch store  /bht exch store
save /burp1 exch store
xpos ypos translate -1 .2 mt bht yinc mul .4 add pd burpwide pr bht yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore} store

/burpwidew 32 store


/burpcomw {save /burpx exch store  /bht exch store
save /burp1 exch store
xpos 1 sub ypos translate 0 .2 mt bht yinc mul .4 add pd burpwidew pr bht yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore} store



/burplebox3.5 {4 burpcom} store
/burplebox5 {5.5 burpcom} store
/burplebox5.5 {6 burpcom} store
/burplebox6 {6.5 burpcom} store
/burplebox6.5 {7 burpcom} store
/burplebox7 {7.5 burpcom} store
/burplebox7.5 {8 burpcom} store
/burplebox8 {8.5 burpcom} store
/burplebox8.5 {9 burpcom} store
/burplebox9 {9.5 burpcom} store
/burplebox9.5 {10 burpcom} store
/burplebox10 {10.5 burpcom} store
/burplebox10.5 {11 burpcom} store
/burplebox11 {11.5 burpcom} store
/burplebox11.5 {12 burpcom} store
/burplebox12 {12.5 burpcom} store

/burplebox11w {11.5 burpcomw} store

/burplebox12.5 {13 burpcom} store
/burplebox13 {13.5 burpcom} store
/burplebox13.5 {14 burpcom} store
/burplebox14 {14.5 burpcom} store
/burplebox14.5 {15 burpcom} store
/burplebox15{15.5 burpcom} store
/burplebox15.5{16 burpcom} store
/burplebox16 {16.5 burpcom} store
/burplebox16.5 {17 burpcom} store

/burplebox18 {18.5 burpcom} store
/burplebox18.5 {19 burpcom} store
/burplebox19 {19.5 burpcom} store

/burplebox21.5 {22 burpcom} store

/burplebox22{22.5 burpcom} store
/burplebox24{24.5 burpcom} store
/burplebox25{25.5 burpcom} store
/burplebox25.5{26 burpcom} store

/burplebox27{27.5 burpcom} store
/burplebox28 {28.5 burpcom} store
/burplebox28.5 {29 burpcom} store
/burplebox34 {34.5 burpcom} store

/burplebox38 {38.5 burpcom} store
/burplebox38.5{39 burpcom} store
/burplebox40{40.5 burpcom} store
/burplebox40.5{41 burpcom} store
/burplebox41.5{42 burpcom} store 
/burplebox42 {42.5 burpcom} store 
/burplebox42.5{43 burpcom} store  % nearly a full page
/burplebox43 {43.5 burpcom} store 


/burplebox34w{34.5 burpcomw} store
/burplebox34.5w{35 burpcomw} store
/burplebox38w{38.5 burpcomw} store
/burplebox38.5w{39 burpcomw} store
/burplebox40w{40.5 burpcomw} store



/burplebox17 {save /burp1 exch store
xpos ypos translate -1 .2 mt 17.5 yinc mul .4 add pd burpwide pr 17.5 yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore
} def



/burplebox20 {save /burp1 exch store
xpos ypos translate -1 .2 mt 20.5 yinc mul .4 add pd burpwide pr 20.5 yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore
} def

/burplebox23 {save /burp1 exch store
xpos ypos translate -1 .2 mt 23.5 yinc mul .4 add pd burpwide pr 23.5 yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore
} def


/burplebox26.5 {save /burp1 exch store
xpos ypos translate -1 .2 mt 27 yinc mul .4 add pd burpwide pr 27 yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore
} def


/burplebox30 {save /burp1 exch store
xpos ypos translate -1 .2 mt 30.5 yinc mul .4 add pd burpwide pr 30.5 yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore
} def



/burplebox36 {save /burp1 exch store
xpos ypos translate -1 .2 mt 36.5 yinc mul .4 add pd burpwide pr 36.5 yinc mul .4 add pu closepath
0.9 setgray fill burp1 restore
} def

%%%%%%%%%%%  figure 1 routine

  % autopositions on box6

%%%%%%%%%%%%%%%%%%%%%%%%%%%%







%%%%%%%%%%%  TWO PATTERNS   %%%%%%%%%%%%%%

/ivoryrndcolor   [230 230 205 40] store  % random pattern colors [red blue green variance ]
/magentarndcolor [230 100 230 120]store


/makepatternstrings {
[230 210 190 80] buildpixels
magentarndcolor /accentpatstring exch store

ivoryrndcolor buildpixels
makeimagestring /bodypatstring exch store
                    } store




/burppatstrings {
ivoryrndcolor buildpixels
makeimagestring /bodypatstring exch store

magentarndcolor buildpixels
makeimagestring /accentpatstring exch store
                } store

/DeviceRGB setcolorspace                %  pick color model
/hpixels 50 store                       %  size of pattern image
/vpixels 50 store
/issize hpixels vpixels mul store

% makestring converts a stack top array into a string...
 
/makestring {dup length string dup /NullEncode filter     
3 -1 roll {1 index exch write} forall pop} def




% /buildpixels makes three nearby colors given [r b g texture] all 0-255 integers

/buildpixels {aload pop /texture exch store /b0 exch store /g0 exch store /r0 exch store 123 srand

/r1 r0 texture random texture 2 div sub add cvi 
dup 255 ge {pop 255}if  dup 0 lt {pop 0} if store
/g1 g0 texture random texture 2 div sub add cvi 
dup 255 ge {pop 255}if  dup 0 lt {pop 0} if store
/b1 b0 texture random texture 2 div sub add cvi 
dup 255 ge {pop 255}if  dup 0 lt {pop 0} if store

/r2 r0 texture random texture 2 div sub add cvi 
dup 255 ge {pop 255}if  dup 0 lt {pop 0} if store
/g2 g0 texture random texture 2 div sub add cvi 
dup 255 ge {pop 255}if  dup 0 lt {pop 0} if store
/b2 b0 texture random texture 2 div sub add cvi 
dup 255 ge {pop 255}if  dup 0 lt {pop 0} if store

/r3 r0 texture random texture 2 div sub add cvi 
dup 255 ge {pop 255}if  dup 0 lt {pop 0} if store
/g3 g0 texture random texture 2 div sub add cvi 
dup 255 ge {pop 255}if  dup 0 lt {pop 0} if store
/b3 b0 texture random texture 2 div sub add cvi 
dup 255 ge {pop 255}if  dup 0 lt {pop 0} if store
      } store

% /makeimagestring creates a sting usable for a pattern image

/makeimagestring {  12345 srand         % make repeatable

  /iarray mark issize { r1 g1 b1} repeat ] store  % fill all with color 1

  issize 2 div cvi { iarray  issize               % fill half with color 2              
  random 3 mul cvi  [ r2 g2 b2 ] 
  putinterval} repeat

  issize 2 div cvi { iarray  issize               % fill third with color 3 
  random 3 mul cvi  [ r3 g3 b3 ] 
  putinterval} repeat

  iarray makestring 
                 } store





% /rndimage shows the random string as a patternable image

/bodyrandimage { 

            gsave  5 dup scale

     <<                                      % start image dicationary
            /ImageType 1                     % always one
            /Width hpixels                   % width in pixels
            /Height vpixels                  % height in pixels
            /ImageMatrix [hpixels
                          0 0 
                          vpixels neg
                          0
                          vpixels ]  


            /DataSource bodypatstring        % proc to get string data     
            /BitsPerComponent 8              % color resolution
            /Decode [0 1 0 1 0 1]            % per red book 4.10
            >>

     image                                   % call the image 

grestore
} def




/accentrandimage { 

            gsave  5 dup scale

     <<                                      % start image dicationary
            /ImageType 1                     % always one
            /Width hpixels                   % width in pixels
            /Height vpixels                  % height in pixels
            /ImageMatrix [hpixels
                          0 0 
                          vpixels neg
                          0
                          vpixels ]  


            /DataSource accentpatstring        % proc to get string data     
            /BitsPerComponent 8              % color resolution
            /Decode [0 1 0 1 0 1]            % per red book 4.10
            >>

     image                                   % call the image 

grestore
} def





% using a separate pattern dictionary for each pattern...

/bodypatdict

<< /PatternType 1     % Tiling pattern
/PaintType 1          % Colored
/TilingType 1
/BBox [0 0 50 50]
/XStep 5
/YStep 5
/PaintProc { begin bodyrandimage end} 
>>   store


/accentpatdict

<< /PatternType 1     % Tiling pattern
/PaintType 1          % Colored
/TilingType 1
/BBox [0 0 50 50]
/XStep 5
/YStep 5
/PaintProc { begin accentrandimage end} 
>>   store


/burpbackmain { save /snapbb exch store


save /snapb exch store      % show the body background
bodypatdict 
matrix                  % Identity matrix
makepattern             % Instantiate the pattern
/bodypat exch def
4 0                              % for the actual slide size
12 8

/Pattern setcolorspace
bodypat setcolor rectfill    % Fill rectangle with pattern
snapb restore

4 0 12 8 line1 black rectstroke
 


save /snapy exch store      % show the accent
accentpatdict 
matrix                  % Identity matrix
makepattern             % Instantiate the pattern
/accentpat exch def
18.5 0 12 8
4 copy
/Pattern setcolorspace
accentpat setcolor rectfill    % Fill rectangle with pattern
snapy restore 
 
18.5 0 12 8 line1 black rectstroke

snapbb restore } store


/figure3x {save /snap3 exch store

translate 

% 34 8 showgrid

makepatternstrings

  burppatstrings
 % burpbackstrings
burpbackmain


  snap3 restore } store

%%%%%%%%%%%%%%% end figure3





%%%%%%%%%%%% first special plot


/special1code {


/a01 [ 
  11.98757334830098  % p1 delay
  0.02494857340377088  % p1 width
  11.96309297293453  % p2 delay
  0.04880748072357122  % p2 width
  11.940266741737353  % p3 delay
  0.07053366579209097  % p3 width
  11.920110003436285  % p4 delay
  0.08917718733052737  % p4 width
  11.903448622759931  % p5 delay
  0.10392320715383363  % p5 width
  11.890997400038934  % p6 delay
  0.1141272527930397  % p6 width
  11.883303463712295  % p7 delay
  0.11934332976518647  % p7 width
  5.940346750117669  % quadrant delay
   ] store    
/a10 [ 
  11.870255884662251  % p1 delay
  0.24926326067621396  % p1 width
  11.627261913532986  % p2 delay
  0.48772075225425126  % p2 width
  11.401006709297277  % p3 delay
  0.7050052291468631  % p3 width
  11.201126478014806  % p4 delay
  0.8916211348287959  % p4 width
  11.036121661040383  % p5 delay
  1.0393583630906704  % p5 width
  10.912994009526542  % p6 delay
  1.1416713778561558  % p6 width
  10.836964879593466  % p7 delay
  1.1939991529573461  % p7 width
  5.405629193521989  % quadrant delay
   ] store      




/a20 [ 
  11.730827315951456  % p1 delay
  0.4971341380973975  % p1 width
  11.247686685343746  % p2 delay
  0.9732376712143491  % p2 width
  10.798693242131715  % p3 delay
  1.407947044520391  % p3 width
  10.402477789378082  % p4 delay
  1.78228682672421  % p4 width
  10.075528131993294  % p5 delay
  2.079475909290011  % p5 width
  9.831551570148512  % p6 delay
  2.285806430413743  % p6 width
  9.680871958761386  % p7 delay
  2.391516582063389  % p7 width
  4.8149587039683155  % quadrant delay
   ] store    

/a30 [ 
  11.582072392748948  % p1 delay
  0.7421737945018947  % p1 width
  10.862633911787377  % p2 delay
  1.454218311923288  % p2 width
  10.194732255409651  % p3 delay
  2.106545777255711  % p3 width
  9.605233324537401  % p4 delay
  2.6708278536717955  % p4 width
  9.118304754762583  % p5 delay
  3.1210612368032926  % p5 width
  8.754459346379754  % p6 delay
  3.435090920436508  % p6 width
  8.529472562792705  % p7 delay
  3.5965061939786693  % p7 width
  4.226667363010421  % quadrant delay
   ] store   



/a40 [ 
  11.424050411047465  % p1 delay
  0.9828418379051129  % p1 width
  10.473248533619292  % p2 delay
  1.9280479848577236  % p2 width
  9.590640663430097  % p3 delay
  2.7980351182823426  % p3 width
  8.810545720192863  % p4 delay
  3.555566231331163  % p4 width
  8.164652806450142  % p5 delay
  4.164668715768244  % p5 width
  7.680713770893433  % p6 delay
  4.592711162444033  % p6 width
  7.380758970713202  % p7 delay
  4.813962276129942  % p7 width
  3.6395557969349425  % quadrant delay
   ] store  



/a50 [ 
  11.25647168216318  % p1 delay
  1.2174139856738683  % p1 width
  10.080431345631026  % p2 delay
  2.391612373063623  % p2 width
  8.987846411116894  % p3 delay
  3.4787553647023585  % p3 width
  8.01966536065963  % p4 delay
  4.433803253978574  % p4 width
  7.214999377113287  % p5 delay
  5.210430981795014  % p5 width
  6.609527274825396  % p6 delay
  5.762766698554145  % p6 width
  6.232831441964791  % p7 delay
  6.050997667516469  % p7 width
  3.0524467812417413  % quadrant delay
   ] store    

/a53 [ 
  11.204229246524123  % p1 delay
  1.2863028469519246  % p1 width
  9.962015674530373  % p2 delay
  2.528117843985992  % p2 width
  8.807469507353026  % p3 delay
  3.680145761308111  % p3 width
  7.783358489290968  % p4 delay
  4.695379940110421  % p4 width
  6.930993065963889  % p5 delay
  5.5244810879620445  % p5 width
  6.288586696196958  % p6 delay
  6.117000009644471  % p6 width
  5.888323429144677  % p7 delay
  6.427466502066167  % p7 width
  2.876129898966852  % quadrant delay
   ] store   

/a60 [ 
  11.078495962518918  % p1 delay
  1.4438411449625086  % p1 width
  9.684772040454877  % p2 delay
  2.840939034126027  % p2 width
  8.38774096372643  % p3 delay
  4.143446978421139  % p3 width
  7.234097294409224  % p4 delay
  5.300789342760972  % p4 width
  6.270187484640822  % p5 delay
  6.2573120579578045  % p5 width
  5.540415121300725  % p6 delay
  6.9509377594411745  % p6 width
  5.083782352079723  % p7 delay
  7.31917029639942  % p7 width
  2.4640721668002356  % quadrant delay
   ] store   

/a70 [ 
  10.888278735987464  % p1 delay
  1.6594599780251222  % p1 width
  9.286332677429444  % p2 delay
  3.270497867115676  % p2 width
  7.791694139706859  % p3 delay
  4.783840563470704  % p3 width
  6.455843532587245  % p4 delay
  6.147367771354908  % p4 width
  5.331869368850619  % p5 delay
  7.300805550943892  % p5 width
  4.473484564450537  % p6 delay
  8.165497800155037  % p6 width
  3.9315873351224724  % p7 delay
  8.640550109600042  % p7 width
  1.8728900051999772  % quadrant delay
   ] store    

/a80 [ 
  10.681702836852158  % p1 delay
  1.8602538062958054  % p1 width
  8.88398269670934  % p2 delay
  3.6714981402848607  % p2 width
  7.200946234572324  % p3 delay
  5.385275030570618  % p3 width
  5.687867904890517  % p4 delay
  6.9536645196485765  % p4 width
  4.403487202517624  % p5 delay
  8.324602905316311  % p5 width
  3.4104122823979494  % p6 delay
  9.417450259887687  % p6 width
  2.774084338047487  % p7 delay
  10.068107274017336  % p7 width
  1.2766645679914034  % quadrant delay
   ] store    




/a90 [ 
  10.447373907519674  % p1 delay
  2.038123534960869  % p1 width
  8.472609797490058  % p2 delay
  4.0258541900581655  % p2 width
  6.615791805649657  % p3 delay
  5.91534811864263  % p3 width
  4.935247854465985  % p4 delay
  7.666864442425741  % p4 width
  3.4934960493166684  % p5 delay
  9.260584158941057  % p5 width
  2.358772151850779  % p6 delay
  10.696787617357046  % p6 width
  1.6101420251774101  % p7 delay
  11.792019752288254  % p7 width
  0.6709845938560051  % quadrant delay
   ] store  

/a95 [ 
  10.307313139895288  % p1 delay
  2.111222840209404  % p1 width
  8.256837177571334  % p2 delay
  4.169598534647832  % p2 width
  6.323664766096179  % p3 delay
  6.124919743159786  % p3 width
  4.567759372280754  % p4 delay
  7.93736307227887  % p4 width
  3.052826978493542  % p5 delay
  9.604367560734132  % p5 width
  1.8471062124079367  % p6 delay
  11.250122874450298  % p6 width
  1.0294512420668695  % p7 delay
  13.056647531415762  % p7 width
  0.36079895429200803  % quadrant delay
   ] store    

/a96 [ 
  10.275153279505902  % p1 delay
  2.1233556309882146  % p1 width
  8.2115482104066  % p2 delay
  4.1930336081984905  % p2 width
  6.264803529331843  % p3 delay
  6.157765833137692  % p3 width
  4.495281237426013  % p4 delay
  7.976346292010689  % p4 width
  2.9669207635656676  % p5 delay
  9.646432050857882  % p5 width
  1.7477032094150075  % p6 delay
  11.320166050312238  % p6 width
  0.9148247359680965  % p7 delay
  13.409077457751365  % p7 width
  0.2975881111242984  % quadrant delay
   ] store  

/a97 [ 
  10.240457024341477  % p1 delay
  2.134077471317074  % p1 width
  8.164867772841955  % p2 delay
  4.213452442998779  % p2 width
  6.205523779081837  % p3 delay
  6.185452328837567  % p3 width
  4.423234605472523  % p4 delay
  8.006618220218015  % p4 width
  2.8821971876470442  % p5 delay
  9.672069264487952  % p5 width
  1.6500883956263123  % p6 delay
  11.355113654260407  % p6 width
  0.8016574526230471  % p7 delay
  13.831443290493283  % p7 width
  0.23374710975272705  % quadrant delay
   ] store  



/a98 [ 
  10.201940773921007  % p1 delay
  2.1427535621580062  % p1 width
  8.1160304405589  % p2 delay
  4.229503836724113  % p2 width
  6.145502859365315  % p3 delay
  6.205687104545131  % p3 width
  4.351688442224891  % p4 delay
  8.024338941005154  % p4 width
  2.7990882078968866  % p5 delay
  9.67371438320096  % p5 width
  1.555079224439453  % p6 delay
  11.330237907918856  % p6 width
  0.69116413541866  % p7 delay
  14.364207461243552  % p7 width
  0.169062719379113  % quadrant delay
   ] store 
   
/a99 [ 
  10.156863627959598  % p1 delay
  2.1480428640811766  % p1 width
  8.06339164056924  % p2 delay
  4.238341714779558  % p2 width
  6.0840316757476  % p3 delay
  6.213675963725404  % p3 width
  4.280754974385665  % p4 delay
  8.02161284750413  % p4 width
  2.718452103604484  % p5 delay
  9.636460505287125  % p5 width
  1.4642999953711353  % p6 delay
  11.197329413972475  % p6 width
  0.5860923925256714  % p7 delay
  15.087472750976061  % p7 width
  0.10317752951067405  % quadrant delay
   ] store  

/a100 [ 
  10.097664622565073  % p1 delay
  2.146284244870163  % p1 width
  8.002396397096308  % p2 delay
  4.23222417093767  % p2 width
  6.019120165289753  % p3 delay
  6.1964902984829  % p3 width
  4.21068681625524  % p4 delay
  7.977592739007122  % p4 width
  2.6425485752095525  % p5 delay
  9.523271990574841  % p5 width
  1.3819874635530311  % p6 delay
  10.855567612314722  % p6 width
  0.4941631819604595  % p7 delay
  16.184573443763554  % p7 width
  0.03542827811961047  % quadrant delay
   ] store   


/range 
[ (01) (10) (20) (30) (40) (50) (53) (60) (70) (80) (90) (95)(96)(97) (98)(99)(100) ]
store


/procit1 {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 13 get 2.5 mul lineto
} def


/procit2 {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 11 get 2.5 mul lineto
} def



/procit3 {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 9 get 2.5 mul lineto
} def


/procit4 {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 7 get 2.5 mul lineto
} def


/procit5 {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 5 get 2.5 mul lineto
} def

/procit6 {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 3 get 2.5 mul lineto
} def

/procit7 {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 1 get 2.5 mul lineto
} def



/procit1d {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 12 get 2.5 mul lineto
} def


/procit2d {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 10 get 2.5 mul lineto
} def



/procit3d {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 8 get 2.5 mul lineto
} def


/procit4d {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 6 get 2.5 mul lineto
} def


/procit5d {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 4 get 2.5 mul lineto
} def

/procit6d {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 2 get 2.5 mul lineto
} def

/procit7d {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 0 get 2.5 mul lineto
} def


/procit8d {  dup cvi  /curval exch store  (a)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 14 get 2.5 mul lineto
} def




% 40 100 10 setgrid
40 40 showgrid
line1 


0 30 mt range {procit7d} forall
40 0 lineto 0 0 lineto closepath
0 settint 0.8 setgray fill 

0 30 mt range {procit6d} forall
40 0 lineto 0 0 lineto closepath
0.1 settint 0.8 setgray fill 

0 30 mt range {procit5d} forall
40 0 lineto 0 0 lineto closepath
0.2 settint 0.8 setgray fill

0 30 mt range {procit4d} forall
40 0 lineto 0 0 lineto closepath
0.27 settint 0.8 setgray fill

0 30 mt range {procit3d} forall
40 0 lineto 0 0 lineto closepath
0.43 settint 0.8 setgray fill



0 30 mt range {procit2d} forall
40 0 lineto 0 0 lineto closepath
0.5 settint 0.8 setgray fill

0 30 mt range {procit1d} forall
40 0 lineto 0 0 lineto closepath
0.6 settint 0.8 setgray fill



0 15 mt range {procit8d} forall
40 0 lineto 0 0 lineto closepath
0.7 settint 0.8 setgray fill 







0 0 mt range {procit1} forall
40 0 lineto closepath
0.6 settint 0.6 setgray fill 

0 0 mt range {procit2} forall
40 0 lineto closepath
0.5 settint 0.6 setgray fill

0 0 mt range {procit3} forall
40 0 lineto closepath
0.43 settint 0.6 setgray fill 

0 0 mt range {procit4} forall
40 0 lineto closepath
0.27 settint 0.6 setgray fill 

0 0 mt range {procit5} forall
40 0 lineto closepath
0.2 settint 0.6 setgray fill 


0 0 mt range {procit6} forall
40 0 lineto closepath
0.1 settint 0.6 setgray fill 


0 0 mt range {procit7} forall
40 0 lineto closepath
0 settint 0.6 setgray fill 







black

0 0 mt 
range {procit1} forall
stroke

0 0 mt 
range {procit2} forall
stroke

0 0 mt 
range {procit3} forall
 stroke 

0 0 mt 
range {procit4} forall
 stroke 

0 0 mt 
range {procit5} forall
 stroke 

0 0 mt 
range {procit6} forall
 stroke 

0 0 mt 
range {procit7} forall
 stroke 






0 30 mt 
range {procit1d} forall

0 30 mt 
range {procit2d} forall

0 30 mt 
range {procit3d} forall
 stroke 

0 30 mt 
range {procit4d} forall
 stroke 

0 30 mt 
range {procit5d} forall
 stroke 

0 30 mt 
range {procit6d} forall
 stroke 

0 30 mt 
range {procit7d} forall
 stroke 

0 15 mt 
range {procit8d} forall
 stroke 


0.3 0.3 0.3 setrgbcolor line3 1 setlinecap 1 setlinejoin

0 0 mt 40 u 40 r 40 d 40 l
[{ 0 0 mt 0.4 l} 10 5 ] yrpt
[{ 40 0 mt 0.4 r} 10 5 ] yrpt
[{ 0 0 mt 0.4 d} 10 5 ] xrpt
[{ 0 40 mt 0.4 u} 10 5 ] xrpt

/cstretch 0.02 store
/sstretch 0 store
/font0 /StoneSans-Bold 1.5 gonzofont
/font1 /StoneSans-Bold 1.2 gonzofont
/font2 /StoneSans-Bold 1 gonzofont
/font: /StoneSans-Bold [0.6 0 0 0.6 0 0.6] gonzofont
/font; /StoneSans-Bold [1.5 0 0 1.5 0 0.2] gonzofont
/yinc 2 store
font0

20 43.7 (BEST  EFFICIENCY  N |;=|0 28\nMAGIC  SINEWAVE) cc





font1
/yinc 1.5 store

0 -2.2 (0.0) cc
20 -2.2 (0.5) cc
40 -2.2 (1.0)cc

20 -4.3 (AMPLITUDE) cc

41 -0.5 (0) cl
41 9.5 (4) cl
41 19.5 (8) cl
41 29.5 (12) cl
41 39.5 (16) cl

45.5 21 (DELAY\nTIME IN\nDEGREES) cc

font2
26.5 1.2 (PULSE  WIDTHS) cc

1.5 17 (PULSE  DELAYS) cl


2.6 32.6 (0|:o) cc
27.4 32.6 (90|:o) cc


% generate actual magic sinewave

/makemagic {gsave translate 0.25 dup scale line3

/ht 17 store
/dht 6 store

0 setlinecap 0 setlinejoin
dht setlinewidth

0 0 mt 
a50 0 get pr
0 settint 0.8 setgray stroke

0 a50 0 get add a50 1 get add 0 mt
a50 2 get pr
0.1 settint 0.8 setgray stroke


0 a50 0 get add a50 1 get add a50 2 get add a50 3 get add     0 mt
a50 4 get pr
0.2 settint 0.8 setgray stroke

0 a50 0 get add a50 1 get add a50 2 get add a50 3 get add
a50 4 get add a50 5 get add
     0 mt
a50 6 get pr
0.3 settint 0.8 setgray stroke

0 a50 0 get add a50 1 get add a50 2 get add a50 3 get add
a50 4 get add a50 5 get add a50 6 get add a50 7 get add
     0 mt
a50 8 get pr
0.4 settint 0.8 setgray stroke


0 a50 0 get add a50 1 get add a50 2 get add a50 3 get add
a50 4 get add a50 5 get add a50 6 get add a50 7 get add
a50 8 get add a50 9 get add
     0 mt
a50 10 get pr
0.5 settint 0.8 setgray stroke


0 a50 0 get add a50 1 get add a50 2 get add a50 3 get add
a50 4 get add a50 5 get add a50 6 get add a50 7 get add
a50 8 get add a50 9 get add a50 10 get add a50 11 get add
     0 mt
a50 12 get pr
0.6 settint 0.8 setgray stroke

0 a50 0 get add a50 1 get add a50 2 get add a50 3 get add
a50 4 get add a50 5 get add a50 6 get add a50 7 get add
a50 8 get add a50 9 get add a50 10 get add a50 11 get add
a50 12 get add a50 13 get add
     0 mt
a50 14 get pr
0.7 settint 0.8 setgray stroke

%% pulses

a50 0 get 0 mt
ht pu
0 a50 1 get pr
ht pd
closepath
0 settint 0.6 setgray fill


a50 0 get a50 1 get add a50 2 get add 
0 mt ht pu
0 a50 3 get pr
ht pd
closepath
0.1 settint 0.6 setgray fill

a50 0 get a50 1 get add a50 2 get add a50 3 get add a50 4 get add
0 mt ht pu
0 a50 5 get pr
ht pd
closepath
0.2 settint 0.6 setgray fill

a50 0 get a50 1 get add a50 2 get add a50 3 get add a50 4 get add
a50 5 get add a50 6 get add
0 mt ht pu
0 a50 7 get pr
ht pd
closepath
0.3 settint 0.6 setgray fill

a50 0 get a50 1 get add a50 2 get add a50 3 get add a50 4 get add
a50 5 get add a50 6 get add a50 7 get add a50 8 get add
0 mt ht pu
0 a50 9 get pr
ht pd
closepath
0.4 settint 0.6 setgray fill

a50 0 get a50 1 get add a50 2 get add a50 3 get add a50 4 get add
a50 5 get add a50 6 get add a50 7 get add a50 8 get add
a50 9 get add a50 10 get add
0 mt ht pu
0 a50 11 get pr
ht pd
closepath
0.5 settint 0.6 setgray fill

a50 0 get a50 1 get add a50 2 get add a50 3 get add a50 4 get add
a50 5 get add a50 6 get add a50 7 get add a50 8 get add
a50 9 get add a50 10 get add a50 11 get add a50 12 get add
0 mt ht pu
0 a50 13 get pr
ht pd
closepath
0.6 settint 0.6 setgray fill





1 setlinecap 1 setlinejoin
black

0 0 mt
a50 0 get 0 rlineto
0 ht pu
a50 1 get 0 rlineto
0 ht pd

a50 2 get 0 rlineto
0 ht pu
a50 3 get 0 rlineto
0 ht pd

a50 4 get 0 rlineto
0 ht pu
a50 5 get 0 rlineto
0 ht pd

a50 6 get 0 rlineto
0 ht pu
a50 7 get 0 rlineto
0 ht pd

a50 8 get 0 rlineto
0 ht pu
a50 9 get 0 rlineto
0 ht pd

a50 10 get 0 rlineto
0 ht pu
a50 11 get 0 rlineto
0 ht pd


a50 12 get 0 rlineto
0 ht pu
a50 13 get 0 rlineto
0 ht pd

a50 14 get 0 rlineto


0.45 setlinewidth
stroke









grestore} def


3.5 33 makemagic




} store   % end special1code definition







%%%%%%%%%%% special2 code

/special2code {


/ad01 [ 
  7.434338157133027  % delay a=60-p5e
  0.11880195485247924  % delay b=p5e-p5s
  0.019577960879085587  % delay c=p1e-p1s
  14.855161666700834  % delay d=p2s-p1e
  0.021983040440492374  % delay e=p2e-p2s
  0.0911673899925809  % delay f=p3s-p2e
  0.0353778304366692  % delay g=p3e-p3s
  7.4235919995647634  % delay h=30-p3e
   ] store  
 
/ad10 [ 
  6.840486668588909  % delay a=60-p5e
  1.1877031146444991  % delay b=p5e-p5s
  0.19606479817654332  % delay c=p1e-p1s
  13.542825252098737  % delay d=p2s-p1e
  0.1524725715290529  % delay e=p2e-p2s
  0.9104569599226266  % delay f=p3s-p2e
  0.4224088615298953  % delay g=p3e-p3s
  6.7475817735097365  % delay h=30-p3e
   ] store   



/ad20 [ 
  6.179615738852249  % delay a=60-p5e
  2.368314508230462  % delay b=p5e-p5s
  0.39486570406405263  % delay c=p1e-p1s
  12.090328683781834  % delay d=p2s-p1e
  0.2773208755122525  % delay e=p2e-p2s
  1.8107046591154443  % delay f=p3s-p2e
  0.8802494355140809  % delay g=p3e-p3s
  5.998600394929625  % delay h=30-p3e
   ] store   

/ad30 [ 
  5.51798715656065  % delay a=60-p5e
  3.537987411554724  % delay b=p5e-p5s
  0.5996610353231375  % delay c=p1e-p1s
  10.6414917563349  % delay d=p2s-p1e
  0.378916570008613  % delay e=p2e-p2s
  2.6949373104326213  % delay f=p3s-p2e
  1.3768763200109077  % delay g=p3e-p3s
  5.252142439774445  % delay h=30-p3e
   ] store    



/ad40 [ 
  4.8560795807034935  % delay a=60-p5e
  4.692317283738298  % delay b=p5e-p5s
  0.8138114048538583  % delay c=p1e-p1s
  9.195452323744191  % delay d=p2s-p1e
  0.46036801366636126  % delay e=p2e-p2s
  3.5594981265840886  % delay f=p3s-p2e
  1.9150363136688284  % delay g=p3e-p3s
  4.50743695304088  % delay h=30-p3e
   ] store    






/ad50 [ 
  4.194298075500072  % delay a=60-p5e
  5.825866502969745  % delay b=p5e-p5s
  1.0408488460292488  % delay c=p1e-p1s
  7.751463747608284  % delay d=p2s-p1e
  0.5238895562340744  % delay e=p2e-p2s
  4.403346953313516  % delay f=p3s-p2e
  2.496487356236706  % delay g=p3e-p3s
  3.7637989621083534  % delay h=30-p3e
   ] store    

/ad53 [ 
  3.995843046736013  % delay a=60-p5e
  6.160868086216446  % delay b=p5e-p5s
  1.112006440311525  % delay c=p1e-p1s
  7.318567062952312  % delay d=p2s-p1e
  0.5397256759732585  % delay e=p2e-p2s
  4.652707315620958  % delay f=p3s-p2e
  2.679463155973238  % delay g=p3e-p3s
  3.5408192162162493  % delay h=30-p3e
   ] store   

/ad60 [ 
  3.5330039078836606  % delay a=60-p5e
  6.9314513603008905  % delay b=p5e-p5s
  1.2842465239317846  % delay c=p1e-p1s
  6.308872401421397  % delay d=p2s-p1e
  0.5713975364200223  % delay e=p2e-p2s
  5.228837780084575  % delay f=p3s-p2e
  3.1216051264200075  % delay g=p3e-p3s
  3.0205853635376627  % delay h=30-p3e
   ] store   

 
/ad70 [ 
  2.8725257224432425  % delay a=60-p5e
  7.998916501222098  % delay b=p5e-p5s
  1.5460427838912807  % delay c=p1e-p1s
  4.8671218102361  % delay d=p2s-p1e
  0.6062046544537196  % delay e=p2e-p2s
  6.042997615507133  % delay f=p3s-p2e
  3.789041064453741  % delay g=p3e-p3s
  2.2771498477926854  % delay h=30-p3e
   ] store   

/ad80 [ 
  2.2131268407607223  % delay a=60-p5e
  9.012727944067371  % delay b=p5e-p5s
  1.8200962344110607  % delay c=p1e-p1s
  3.4258327180993433  % delay d=p2s-p1e
  0.6400219482894229  % delay e=p2e-p2s
  6.85987852874419  % delay f=p3s-p2e
  4.495547368289273  % delay g=p3e-p3s
  1.532768417338616  % delay h=30-p3e
   ] store   




/ad90 [ 
  1.55474755544018  % delay a=60-p5e
  9.946227643338275  % delay b=p5e-p5s
  2.048752785780998  % delay c=p1e-p1s
  1.9853102905593687  % delay d=p2s-p1e
  0.736140589142309  % delay e=p2e-p2s
  7.705915111477708  % delay f=p3s-p2e
  5.236535369142075  % delay g=p3e-p3s
  0.7863706551190859  % delay h=30-p3e
   ] store    


/ad95 [ 
  1.225355348586767  % delay a=60-p5e
  10.367111550363887  % delay b=p5e-p5s
  2.0303138224619843  % delay c=p1e-p1s
  1.2665437513423114  % delay d=p2s-p1e
  0.9241283097125574  % delay e=p2e-p2s
  8.155346335065047  % delay f=p3s-p2e
  5.619630049711802  % delay g=p3e-p3s
  0.4115708327556433  % delay h=30-p3e
   ] store 
  
/ad98 [ 
  1.026684367555248  % delay a=60-p5e
  10.596415552349142  % delay b=p5e-p5s
  1.807508982542501  % delay c=p1e-p1s
  0.837605401539733  % delay d=p2s-p1e
  1.2493523058395936  % delay e=p2e-p2s
  8.441202830348274  % delay f=p3s-p2e
  5.855882255842914  % delay g=p3e-p3s
  0.18534830398259316  % delay h=30-p3e
   ] store     


/ad100 [ 
  0.8921862350266565  % delay a=60-p5e
  10.732271751681054  % delay b=p5e-p5s
  1.3169014782635031  % delay c=p1e-p1s
  0.5554591355065241  % delay d=p2s-p1e
  1.8052854865738012  % delay e=p2e-p2s
  8.644568525896716  % delay f=p3s-p2e
  6.020358566571353  % delay g=p3e-p3s
  0.032968820480391514  % delay h=30-p3e
   ] store    


/range 
[ (01) (10) (20) (30) (40) (50) (53) (60) (70) (80) (90) (95) (98)(100) ]
store


/procit1 {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 1 get 2.5 mul lineto
} def


/procit2 {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 2 get 2.5 mul lineto
} def



/procit3 {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 4 get 2.5 mul lineto
} def


/procit4 {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 5 get 2.5 mul lineto
} def


/procit5 {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 6 get 2.5 mul lineto
} def

/procit6 {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 3 get 2.5 mul lineto
} def

/procit7 {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 1 get 2.5 mul lineto
} def



/procit1d {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 0 get 2.5 mul lineto
} def


/procit2d {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 3 get 2.5 mul lineto
} def



/procit3d {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 7 get 2.5 mul lineto
} def


/procit4d {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 6 get 2.5 mul lineto
} def


/procit5d {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 4 get 2.5 mul lineto
} def

/procit6d {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 2 get 2.5 mul lineto
} def

/procit7d {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 0 get 2.5 mul lineto
} def


/procit8d {  dup cvi  /curval exch store  (ad)exch  mergestr cvn /curdat exch store

curval 2.5 div   curdat cvx exec 14 get 2.5 mul lineto
} def




% 40 100 10 setgrid
40 40 showgrid
line1 

% delays

0 37.5 mt range {procit2d} forall
40 0 lineto 0 0 lineto closepath
0.15 settint 0.8 setgray fill

0 18.75 mt range {procit1d} forall
40 0 lineto 0 0 lineto closepath
0 settint 0.8 setgray fill 


0 18.75 mt range {procit3d} forall
40 0 lineto 0 0 lineto closepath
0.3 settint 0.8 setgray fill

% pulses

0 0 mt range {procit1} forall
40 0 lineto 0 0 lineto closepath
0.0 settint 0.6 setgray fill

0 0 mt range {procit4} forall
40 0 lineto 0 0 lineto closepath
0.5 settint 0.6 setgray fill

0 0 mt range {procit5} forall
40 0 lineto 0 0 lineto closepath
0.6 settint 0.6 setgray fill

0 0 mt range {procit2} forall
40 0 lineto 0 0 lineto closepath
0.15 settint 0.6 setgray fill

0 0 mt range {procit3} forall
40 0 lineto 0 0 lineto closepath
0.3 settint 0.6 setgray fill


black line1

0 18.75 mt 
range {procit1d} forall stroke

0 37.5 mt 
range {procit2d} forall stroke

0 18.75 mt 
range {procit3d} forall stroke
 stroke


% width outlines

0 0 mt 
range {procit1} forall stroke

0 0 mt 
range {procit2} forall stroke

0 0 mt 
range {procit3} forall stroke

0 0 mt 
range {procit4} forall stroke

0 0 mt 
range {procit5} forall stroke





0.3 0.3 0.3 setrgbcolor line3 1 setlinecap 1 setlinejoin

0 0 mt 40 u 40 r 40 d 40 l
[{ 0 0 mt 0.4 l} 10 5 ] yrpt
[{ 40 0 mt 0.4 r} 10 5 ] yrpt
[{ 0 0 mt 0.4 d} 10 5 ] xrpt
[{ 0 40 mt 0.4 u} 10 5 ] xrpt

/cstretch 0.02 store
/sstretch 0 store
/font0 /StoneSans-Bold 1.5 gonzofont
/font1 /StoneSans-Bold 1.2 gonzofont
/font2 /StoneSans-Bold 1 gonzofont
/font: /StoneSans-Bold [0.6 0 0 0.6 0 0.6] gonzofont
/font; /StoneSans-Bold [1.5 0 0 1.5 0 0.2] gonzofont
/yinc 2 store
font0

20 45 (DELTA FRIENDLY  N |;=|0 28\nMAGIC  SINEWAVE) cc





font1
/yinc 1.5 store

0 -2.2 (0.0) cc
20 -2.2 (0.5) cc
40 -2.2 (1.0)cc

20 -4.3 (AMPLITUDE) cc

41 -0.5 (0) cl
41 9.5 (4) cl
41 19.5 (8) cl
41 29.5 (12) cl
41 39.5 (16) cl

46.5 21 (DELAY\nTIME IN\nDEGREES) cc

font2
23.5 4.7 (PULSE  WIDTHS) cc

1.5 22.5 (PULSE  DELAYS) cl




% generate actual magic sinewave

/makemagicold {gsave translate 0.25 dup scale line3

/ht 12 store
/dht 6 store

0 setlinecap 0 setlinejoin
dht setlinewidth

0 0 mt 
a50 0 get pr
0 settint 0.8 setgray stroke

0 a50 0 get add a50 1 get add 0 mt
a50 2 get pr
0.1 settint 0.8 setgray stroke


0 a50 0 get add a50 1 get add a50 2 get add a50 3 get add     0 mt
a50 4 get pr
0.2 settint 0.8 setgray stroke

0 a50 0 get add a50 1 get add a50 2 get add a50 3 get add
a50 4 get add a50 5 get add
     0 mt
a50 6 get pr
0.3 settint 0.8 setgray stroke

0 a50 0 get add a50 1 get add a50 2 get add a50 3 get add
a50 4 get add a50 5 get add a50 6 get add a50 7 get add
     0 mt
a50 8 get pr
0.4 settint 0.8 setgray stroke


0 a50 0 get add a50 1 get add a50 2 get add a50 3 get add
a50 4 get add a50 5 get add a50 6 get add a50 7 get add
a50 8 get add a50 9 get add
     0 mt
a50 10 get pr
0.5 settint 0.8 setgray stroke


0 a50 0 get add a50 1 get add a50 2 get add a50 3 get add
a50 4 get add a50 5 get add a50 6 get add a50 7 get add
a50 8 get add a50 9 get add a50 10 get add a50 11 get add
     0 mt
a50 12 get pr
0.6 settint 0.8 setgray stroke

0 a50 0 get add a50 1 get add a50 2 get add a50 3 get add
a50 4 get add a50 5 get add a50 6 get add a50 7 get add
a50 8 get add a50 9 get add a50 10 get add a50 11 get add
a50 12 get add a50 13 get add
     0 mt
a50 14 get pr
0.7 settint 0.8 setgray stroke

%% pulses

a50 0 get 0 mt
ht pu
0 a50 1 get pr
ht pd
closepath
0 settint 0.6 setgray fill


a50 0 get a50 1 get add a50 2 get add 
0 mt ht pu
0 a50 3 get pr
ht pd
closepath
0.1 settint 0.6 setgray fill

a50 0 get a50 1 get add a50 2 get add a50 3 get add a50 4 get add
0 mt ht pu
0 a50 5 get pr
ht pd
closepath
0.2 settint 0.6 setgray fill

a50 0 get a50 1 get add a50 2 get add a50 3 get add a50 4 get add
a50 5 get add a50 6 get add
0 mt ht pu
0 a50 7 get pr
ht pd
closepath
0.3 settint 0.6 setgray fill

a50 0 get a50 1 get add a50 2 get add a50 3 get add a50 4 get add
a50 5 get add a50 6 get add a50 7 get add a50 8 get add
0 mt ht pu
0 a50 9 get pr
ht pd
closepath
0.4 settint 0.6 setgray fill

a50 0 get a50 1 get add a50 2 get add a50 3 get add a50 4 get add
a50 5 get add a50 6 get add a50 7 get add a50 8 get add
a50 9 get add a50 10 get add
0 mt ht pu
0 a50 11 get pr
ht pd
closepath
0.5 settint 0.6 setgray fill

a50 0 get a50 1 get add a50 2 get add a50 3 get add a50 4 get add
a50 5 get add a50 6 get add a50 7 get add a50 8 get add
a50 9 get add a50 10 get add a50 11 get add a50 12 get add
0 mt ht pu
0 a50 13 get pr
ht pd
closepath
0.6 settint 0.6 setgray fill





1 setlinecap 1 setlinejoin
black

0 0 mt
a50 0 get 0 rlineto
0 ht pu
a50 1 get 0 rlineto
0 ht pd

a50 2 get 0 rlineto
0 ht pu
a50 3 get 0 rlineto
0 ht pd

a50 4 get 0 rlineto
0 ht pu
a50 5 get 0 rlineto
0 ht pd

a50 6 get 0 rlineto
0 ht pu
a50 7 get 0 rlineto
0 ht pd

a50 8 get 0 rlineto
0 ht pu
a50 9 get 0 rlineto
0 ht pd

a50 10 get 0 rlineto
0 ht pu
a50 11 get 0 rlineto
0 ht pd


a50 12 get 0 rlineto
0 ht pu
a50 13 get 0 rlineto
0 ht pd

a50 14 get 0 rlineto


0.45 setlinewidth
stroke









grestore} def


/makemagic {gsave translate 0.8 dup scale line3

/ht 3 store
/dht 1.5 store

0 setlinecap 0 setlinejoin
dht setlinewidth

0 0 mt 
ad70 0 get pr
0 settint 0.8 setgray stroke


ad70 0 get ad70 1 get add ad70 2 get add  
0 mt
ad70 3 get pr
0.15 settint 0.8 setgray stroke


ad70 0 get ad70 1 get add ad70 2 get add  
ad70 3 get add ad70 4 get add ad70 5 get add ad70 6 get add
0 mt
ad70 7 get pr
0.3 settint 0.8 setgray stroke

% pulses


ad70 0 get 0 mt
ht 2 mul pu
ad70 1 get pr
ht 2 mul pd
closepath
0 settint 0.6 setgray fill



ad70 0 get ad70 1 get add 0 mt
ht 2 mul pu
ad70 2 get pr
ht 2 mul pd
closepath
0.15 settint 0.6 setgray fill

ad70 0 get ad70 1 get add ad70 2 get add  ad70 3 get add              0 mt
ht 2 mul pu
ad70 4 get pr
ht 2 mul pd
closepath
0.30 settint 0.6 setgray fill

ad70 0 get ad70 1 get add ad70 2 get add  ad70 3 get add  ad70 4 get add            0 mt
ht 2 mul pu
ad70 5 get pr
ht 2 mul pd
closepath
0.5 settint 0.6 setgray fill

ad70 0 get ad70 1 get add ad70 2 get add  ad70 3 get add  ad70 4 get add
ad70 5 get add            0 mt
ht 2 mul pu
ad70 6 get pr
ht 2 mul pd
closepath
0.6 settint 0.6 setgray fill





% outlines

black line1
1 setlinecap 1 setlinejoin


0 0 mt
ad70 0 get pr
ht pu
ad70 1 get pr
ht pd
ht pu
ad70 2 get pr
ht pd

ad70 3 get pr 
ht pu
ad70 4 get pr
ht pd
ht pu
ad70 5 get pr
ht pd
ht pu
ad70 6 get pr
ht pd

ad70 7 get pr


stroke




0 0 mt
ad70 0 get pr
ht 2 mul  pu
ad70 1 get ad70 2 get add pr
ht 2 mul pd

ad70 3 get pr
ht 2 mul pu

ad70 4 get ad70 5 get add ad70 6 get add pr
ht 2 mul pd



stroke






% p3 poker

17.8 -0.45 mt 1.65 -2.5 rlineto black line1 stroke

11.5 -0.45 mt -1.65 -2.5 rlineto black line1 stroke



grestore } def






 12 31 makemagic

font2
11 30.5  (0|:o) cc
37.5 30.5   (30|:o) cc
28.5 28.3 (p2) cc
18.9 28.3 (p1) cc


18 31.8 (p5) cc
28.8 31.8 (p4) cc
32.7 31.8 (p3) cc

18 34.2 (p6) cc
30.2 34.2 (p7) cc

} store  % end special 2 def

% ----------



%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


 % //// REVISED DIPDRAW PROC /////
electronics begin       
% dipdraw - draws a dip integrated circuit.  (old code to be improved)

% Enter with currentpoint set to pin 1 and scale
% set so that 1.0 = distance between pins.  Then
% do a numpins-(name)-(hipins)-(lopins) dipdraw
% Pin callouts preceeded by / will be complemented.
    
% main dipdraw entry:
/dipdraw { save /dipsnap exch def /hipins exch def /lopins
exch def /chipname exch def /numpins exch def

mark 0 0 0 0 0 0 0 0 0 0 0 0 % temp patch

/howlong
{numpins 2 div cvi 1 add} def /howhigh {4 numpins 36 ge
{1 add} if} def /stub {howhigh 1.4 sub 2 div} def

% internal service subs start here:

/pinproc {numpins 2 div cvi{newpath 0 cpos 0.37 0 360 arc
gsave 1 setgray fill grestore 0.067 setlinewidth stroke 
pin# 5 string cvs dup stringwidth pop 2 div neg cpos
0.2 sub moveto show 1 0 translate /pin# pin# dir add
def} repeat } def

/stretchprint { dup stringwidth pop 2 div neg exch length
1 sub stretch mul 2 div sub  0 moveto callout (/)
anchorsearch true eq {currentpoint exch stretch add exch
moveto pop dup /callout exch def stringwidth
pop callout length 1 sub stretch mul add /barwide exch def
0.033 setlinewidth gsave currentpoint 0.55 add moveto
barwide 0 rlineto stroke grestore} if stretch 0 callout
ashow pop} def

/pincallouts{0 vpos translate {workstring ( ) search true
eq {/callout exch def pop /workstring exch def callout
stretchprint 1 0 translate}{dup /callout exch def
stretchprint exit } ifelse}loop} def

% actual dipdraw process starts here:

% ........ the outline:

gsave 1 setlinecap 1 setlinejoin
currentpoint translate


newpath -1 howhigh 2 div 0.7 -90 90  arc 0 stub
rlineto howlong 0 rlineto 0 howhigh neg rlineto howlong
neg 0 rlineto closepath 

gsave grayshade setgray fill grestore
  grayshade dup 1 ne {0.33}{0} ifelse setgray 
0.36 setlinewidth stroke   


 newpath -.55 .45 0.15 0 360
arc fill 
black
% ........ pin circles and numbers:

/Helvetica-Bold findfont [0.4 0 0 0.55 0 0] makefont
setfont gsave /pin# 1 def  /dir 1 def /cpos 0 def pinproc
grestore gsave /pin# numpins def  /dir -1 def /cpos howhigh
def pinproc grestore


%  pin callouts:

/Helvetica findfont [0.35 0 0 0.6 0 0] makefont setfont
/stretch 0.033 def gsave /workstring hipins def /vpos
0.6 def  pincallouts grestore gsave /workstring
lopins def /vpos howhigh 1.05 sub def pincallouts
grestore

%  device number:
grayshade 1 ne {0.33}{0} ifelse setgray
/Helvetica-Bold findfont [1.4 0 0 1 0 0] makefont setfont
/stretch 0.05 def gsave numpins 2 div 1 sub 2 div howhigh
2 div 0.33 sub translate chipname dup /callout exch def
stretchprint grestore
black
%  end cleanup:

grestore grestore
cleartomark dipsnap restore} def
end  % get out of electronics? 

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%











/special1 {save /s1snap exch store  4.5 2.5 translate 
0.8 dup scale special1code s1snap restore} store


/special2 {save /s1snap exch store  4.5 17 translate 
0.8 dup scale special2code s1snap restore} store



/special5 {gsave 4 -5.85 translate 
         line1  black
         0.3 0 mt 0.3 l 5.2 u 0.3 r
         13.2 0 mt  0.3 r 5.2 u 0.3 l
         15.3 0 mt 0.3 l 5.2 u 0.3 r
         18.3 0 mt 0.3 r 5.2 u 0.3 l grestore
             } store

/xkernon {/kernsave kern store  /kern 0.18 store } def
/xkernoff {/kern kernsave store} def

/pagenum 1 store

/startnewpage {
black  beige 0.35 setgray 
21 -2.5 (|3\320|j|j) ggnum 10 string cvs mergestr (|j.|j) mergestr
pagenum 10 string cvs mergestr (|j|j\320) mergestr cc
aqua

showpage

%% start next page 

/pagenum pagenum 1 add store


50 50 10 setgrid                               % create grid
setpagefonts

font1
textleft texttop 
} def

/su {surl font6} store
/to {tinton1 font6} store
/tx {tintoff font1} store



/tabs [7 20] store

/overstrikeht 0.52 store

%%%% glyph module





/font: /Symbol 1.5 gonzofont
/font+ /Helvetica [0.9 0 0 0.85 0 0.6] gonzofont
/font= /Helvetica 1.5 gonzofont


/glyphx1 { mark /glyphx1exec cvx ] cvx 
           printlist exch 3 index exch       % stuff into gonzo printlist
           put exch 1 add exch               % increment gonzo list count     
          } store

/glyphx1exec {gsave currentpoint 0.31 add translate  0 setgray
      font:  0 0.6 moveto (\266j) show  
       0 -1.3 moveto (\266) show font= (x) show
       line2 0 0.1 mt 1.8 r
       grestore} store


/glyphy1 { mark /glyphy1exec cvx ] cvx 
           printlist exch 3 index exch       % stuff into gonzo printlist
           put exch 1 add exch               % increment gonzo list count     
          } store

/glyphy1exec {gsave currentpoint 0.31 add translate  0 setgray
      font:  0 0.6 moveto (\266j) show  
       0 -1.3 moveto (\266) show font= (y) show
       line2 0 0.1 mt 1.8 r
       grestore} store


/glyphz1 { mark /glyphz1exec cvx ] cvx 
           printlist exch 3 index exch       % stuff into gonzo printlist
           put exch 1 add exch               % increment gonzo list count     
          } store

/glyphz1exec {gsave currentpoint 0.31 add translate  0 setgray
      font:  0 0.6 moveto (\266j) show  
       0 -1.3 moveto (\266) show font= (z) show
       line2 0 0.1 mt 1.8 r
       grestore} store




/glyphx2 { mark /glyphx2exec cvx ] cvx 
           printlist exch 3 index exch       % stuff into gonzo printlist
           put exch 1 add exch               % increment gonzo list count     
          } store

/glyphx2exec {gsave currentpoint 0.31 add translate  0 setgray
      font:  0 0.6 moveto (\266) show font+ (2) show font: (j) show  
       0 -1.4 moveto (\266) show font= (x) show font+ (2) show
       line2 0 0.1 mt 1.8 r
       grestore} store


/glyphy2 { mark /glyphy2exec cvx ] cvx 
           printlist exch 3 index exch       % stuff into gonzo printlist
           put exch 1 add exch               % increment gonzo list count     
          } store

/glyphy2exec {gsave currentpoint 0.31 add translate  0 setgray
      font:  0 0.6 moveto (\266) show font+ (2) show font: (j) show   
       0 -1.4 moveto (\266) show font= (y) show font+ (2) show
       line2 0 0.1 mt 1.8 r
       grestore} store


/glyphz2 { mark /glyphz2exec cvx ] cvx 
           printlist exch 3 index exch       % stuff into gonzo printlist
           put exch 1 add exch               % increment gonzo list count     
          } store

/glyphz2exec {gsave currentpoint 0.31 add translate  0 setgray
      font:  0 0.6 moveto (\266) show font+ (2) show font: (j) show  
       0 -1.4 moveto (\266) show font= (z) show font+ (2) show
       line2 0 0.1 mt 1.8 r
       grestore} store




/lateblack { mark 1 0 0.7 /setrgbcolor cvx ] cvx 
           printlist exch 3 index exch       % stuff into gonzo printlist
           put exch 1 add exch               % increment gonzo list count     
          } store


/lateburple { mark 0.5 0 1 /setrgbcolor cvx ] cvx 
           printlist exch 3 index exch       % stuff into gonzo printlist
           put exch 1 add exch               % increment gonzo list count     
          } store

%%%%%%%%%%%%% 

/autofigure2 {save /af2 exch store  xpos ypos yinc add translate     
              6.5 -2 250 243  .070     % xpos ypos xres yres pixscale
              (http://www.tinaja.com/images/bargs/reels01.jpg)   % url first
              (C:\\Documents and Settings\\don\\Desktop\\gurugrams\\zzimages\\reelsx01.jpg)
              jpegimageprocwithlink
              af2 restore} store

%%%%%%%%%%%%%%

% "a" sample figure


/figure1 { 
 1.5 -11 translate

0.6 dup scale


% 50 30 showgrid


/font0 /MyriadPro-Bold [ 38.69 0 0 59.3 -0.6 0 ] gonzofont

font0 

0.5 0.5 0.5 setrgbcolor

0 0 (A) cl

0.75 0 0 setrgbcolor line2


0 0 mt 40 pu 24 pr 40 pd closepath stroke


line1 
[{ 0 0 mt 24 r} 5 8 ] yrpt
[{0 0 mt 40 u } 4 6 ] xrpt



0 0 0.75  setrgbcolor

gsave  4 25 translate 
6 {

[{0.5 0.5 mt dot} 0.57 6] xrpt

0 0.8 translate } repeat

grestore

} store


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%





/font; /Helvetica [0.7 0 0 0.7 0 0.4] gonzofont
font1

/font- /Symbol 0.85 gonzofont


aqua 0.33 setgray
font0

/narrowx {/txtwide txtwide 8.5 sub store} store
/widenx {/txtwide txtwide 8.5 add store} store


20 47.3 0.7  add    %  1 sub  
(Superbly |j|jLegible |j|jFonts:)cc

20 45.3 0.7  add  % 1 sub  
(An |jImproved |jBitmap |jTypewriter) cc

black
font2
textleft 43  0.3 add % this one only  need |h below 
(|/aqua |/staytint1 |3Don Lancaster
Synergetics, Box 809, Thatcher, AZ 85552
copyright c2005 as |/surl |6GuruGram|1|/gurgrm01  |/tinton1 |6#53
|/surl http://www.tinaja.com|/tinaja 
|/surl don@tinaja.com|/maildon 
(928) 428-4073
|/aqua |/black  
|a|0B|b|1|jack in |/su GuruGram|1|/gurgrm01  #37 of |/su BMFONTS.PDF|1|/bmfonts  and over in our |/su Precision Bitmap Fonts|/bmfont01           |/su Repository|1|/bmfont01 , we saw that the secrets to ultra small typography of limited resolution were to carefully |/to lock the fontshapes|/tx  to the pixels being displayed; to use a |/to post      |/to process anti-aliasing|/tx  to make each pixel represent a true gray-shaded average of its letter content; to provide a |/to full transparency|/tx  blended style character overlay; and to |/to work at 1:1 final project size|/tx . 
|h
We further saw that such precision small bitmaps were exceptionally useful for photo retouching. Particularly on such |/su eBay|1|/ebaystore  items as electronic test equipment panels. Besides being of interest for display research, working on |/su eBook readers|/tx , or doing ultra small signage as might be needed on a model railroad.
|h
I've recently completed the beta of a new |/su AUTOBM1.PSL|1|/autobm1.psl   bitmap typewriter that nearly completely automates the once tedious process of creating suitable very small bitmapped fonts. Because font characters are now created |/to on demand|/tx  as needed, any font can be used and there is no longer any need for extensive precompiled bitmap libraries.
|h
A quick |/su demo|1|/bmdemo1.bmp  can be found |/su here|1|/bmdemo1.bmp . Some real world projects appear |/su here|1|/hp331002.jpg , |/su here|1|/sptimer1.jpg , and |/su here|1|/wave1001.jpg , and especially |/su here|1|/tek576.jpg . Be sure to reclick for full size.
|h
|c
How it works
|d 
A precision font family size can be specified by the |/to height|/tx  and |/to width|/tx  of its pixels for an upper case letter "A". While our technique works with any |/su PostScript|1|/post01  font, the choice of |/su MyriadPro-Bold|1|/myriadfont  seems to work extremely well. Besides its being included in Adobe's |/su Acrobat 7|1|/adobeacrobat  package.
|h
The object of our code is to create a |/su bitmap|1|/expbmp  of the chosen lettering in the chosen sizes |/to properly blended|/tx  over a chosen background. This "scratch" bitmap can then be cut and pasted into your main bitmap image being post processed. 
|h
A scratch bitmap size of 400 x 400 is presently in use. It is split into |/to four|/tx  horizontal stripes to let you work up to four backgrounds at any given time. 
|h
) cl 

startnewpage 

(|/su AUTOBM1.PSL|1|/autobm1.psl  is written in raw |/su PostScript|1|/tx . While this was developed by using my         |/su Gonzo Utilities|1|/gonzoutils , Gonzo is not absolutely needed during runtime as several internal procs have been included. To use your bitmap typewriter, you bring your code up in |/to Wordpad|/tx  or any other editor, make desired changes, and then send over it to      |/su Acrobat Distiller|1|/distlang . Distiller in turn uses |/to PostScript-as-Language|/tx  to write a new scratch bitmap to disk.
|h
The bitmap typewriter has |/to three|/tx  independent internal array-of-arrays group of strings representing individual pixels. One each for red, blue, and green. Only after all characters are properly entered do these string groups get converted to a conventional |/to .BMP|/tx  combined RGB 8-bit bitmap and are written to disk for you.
|h
One or more font families will get held in a separate array-of-arrays group of data values. With the exception of our initial "A" character and a space, |/to characters are         |/to added only when and as needed|/tx . Reuse of any character during imaging is thus much faster. 
|h
After analysis, a typical letter |/to "A"|/tx  might look like\274
|6|/shiftin |/burple |/burplebox9 |/staytint1 
|h
       [  [1.0000 0.8888 0.0000 0.0000 0.9166 1.0000] 
          [1.0000 0.6111 0.1111 0.0000 0.6666 1.0000] 
          [1.0000 0.3888 0.3055 0.1666 0.3888 1.0000]
          [1.0000 0.1111 0.5277 0.4166 0.1111 1.0000] 
          [0.8888 0.0000 0.4722 0.4166 0.0000 0.8888] 
          [0.6111 0.0000 0.0000 0.0000 0.0000 0.6111] 
          [0.3888 0.1111 1.0000 1.0000 0.0555 0.3888] 
          [0.1111 0.3611 1.0000 1.0000 0.2500 0.1111]  ]
|h
|1|/shiftout |/aqua |/black 
Each data value is in the same relative position as its generated pixels. Each data value represents |/to an average|/tx  of 36 or more samples of a high resolution font. The data value rules are\274
|6|/shiftin |/aqua |/burplebox3.5 |/staytint1 
|h
                  A 0.0000 data value is fully OPAQUE.
|h
              A 1.0000 data value is fully TRANSPARENT.
|h
|1|/shiftout |/aqua |/black 
This is similar to a |/to 0 setgray|/tx  being maximum black ink. You can see how the center top and lower corners of the above array clearly show an uppercase |/to "A"|/tx .
|h 
When entering the character onto the bitmap, the data value decides how much the "new" character pixel will overwrite its "old" background. Ferinstance, if the old blue background pixel is color 64 and the new blue character pixel is color 128 and the data value is 0.2500, the new blue value will be 112. Because the new color is one quarter transparent and three-quarters opaque.
|h

) cl 

startnewpage 

(We'll note that the |/su MyriadPro-Bold|1|/myriadfont  "A" is not quite symmetric, so some values do not exactly mirror each other. The right foot is apparently slightly wider.
|h
|c
Analyzing |jthe |jFont |jCharacters
|d
The tricky part is starting with a large high resolution font character and stuffing it down into an exact number of properly offset horizontal and vertical pixels. From which we can derive the needed opacity data values for each pixel. 
|h
We always start with an upper case |/to "A"|/tx . And use it to define our font size. Rather than messing with font metric tables, we will redo everything the hard way. After a large 100 point imaging of a character, a vertical sample line is first started to the left and slowly moved right. Points are sampled using |/su PostScript's|1|/post01  little known and incredibly powerful |/to infill|/tx  operator. On the first hit of an opaque sample, the character's left boundary |/to clb|/tx  can be determined.
|h
A leftgoing sweep is used to find the |/to crb|/tx  right boundary, while vertical sweeps are used for |/to ctb|/tx  and |/to cbb|/tx . The |/to "A"|/tx  values are then saved as |/to gcwide|/tx , |/to gchigh|/tx , and |/to gctb |/tx to be used as |/to normalized values|/tx  that will determine how many vertical and horizontal pixels will be needed for the other characters.
|h
The upper case |/to "A"|/tx  will be shown in its called-for horizontal and vertical pixel size. By using the normalized "A" values, the other characters are auto adjusted to the needed pixel count widths, heights, and vertical offsetting. Thus, a "W" will be wider than an "f", and the top pixels of a lower case "c" will start below its upper case equivalent. 
|h
Descenders are handled automatically, stopping when you run out of array.
|h
Two rows of invisible |/to [ 0.0000 0.0000 0.0000 \274 0.0000 ] |/tx  padding are added to the |/to top|/tx  of the upper case "A" and many other characters. This allows for the lower case "h", etc\274 whose ascender may be slightly |/to higher|/tx  than a capital letter. 
|h
As is apparently the case with |/su MyriadPro-Bold|1|/myriadfont .
|h
Your scratch bitmap vertical positioning will thus normally be |/to two pixels above|/tx  the |/to top|/tx  of most characters. 
|h
A convention\274
|6|/shiftin |/aqua |/burplebox3 |/staytint1 
|h
       All characters build from the TOP down, starting
       TWO PIXELS ABOVE the top of an upper case "A".
|h
|1|/shiftout |/aqua |/black 
|h
Let's look at an example of how the post anti-aliased and averaged data values are gotten\274







) cl 

startnewpage 

(|/figureoneauto 









Grossly oversized pixels are carefully mapped to |/to exactly|/tx  fit a large high resolution plot of the character to be evaluated. Each pixel is |/to spatially|/tx  sampled 36 or more times as shown in blue. An average is created by using the |/to infill|/tx  operator to determine opaque or clear. In this example, we seem to have 14 white hits and 22 black ones, for a transparency of 14/36 = 0.3811. Which exactly matches the data value in our previous array.
|h
This also is the key secret to the extreme legibility. Other characters are similarly mapped by first relating them to the "A" character defaults.
|h
|c
Getting |jStarted
|d
You normally begin a bitmap typewriter session by loading |/su AUTOBM1.PSL|1|/autobm1.psl  into       |/to Wordpad|/tx  or a similar editor. Most of your changes will normally be at the very      |/to end|/tx  of the document. Your first order of business is to alter |/to targetfilename|/tx  and    |/to targetfilenameprefix|/tx  so your bitmap will end up where you expect it to.
|h
Current color values may be defined when needed by a |/to /curcolor [83 89 74]         |/to store|/tx , or predefined to a name such as |/to /teklight|/tx  or |/to /tekdark|1|/tx . The integer values range from 0 to 240 and may be read directly from the color palette in |/to Paint|/tx  or similar programs. 0 is black, 240 is maximum luminance.
|h
Your background color(s) are put down next by using |/to setbackA|/tx  on up through       |/to setbackD|/tx . With |/to setbackA|/tx  taking care of the |/to bottom quarter|/tx  of your screen.
|h
) cl 

startnewpage 

(A foreground color is then chosen as is the desired current font size. Such as with a |/to tekdark|/tx  followed up by a |/to 6 8 setbmsize|/tx . The first digit is the bitmap |/to width|/tx .
|h
You are now ready to type away. Enter a |/to 3 280 (Your String of Characters)           |/to setgraystring|/tx  to continue. The first integer is the horizontal start position, while the second is two pixels |/to above|/tx  the top pixel of your upper case characters. Keep repeating string entry till all needed sizes, colors, and values are complete.
|h
To complete your session, save |/su AUTOBM1.PSL|1|/autobm1.psl  under a new filename and send it to |/su Acrobat Distiller|1|/distlang . Your new scratch bitmap should be automatically generated and appear where you expected it to. Note that there is no actual |/to .PDF|/tx  output; our main goal here is a |/to .BMP|/tx  scratch file. A |/to "no file produced"|/tx  error can be normal and expected.
|h
|c
Bells |jand |jWhistles
|d
The bitmap typewriter automatically moves you down to the next line if you run out of character room. Breaks are on full characters, but |/to not|/tx  on whole words. Carriage returns work as expected. Their size is set by the |/to yinc|/tx  variable.
|h
If you enter a |/to 0 0 (new character string) setgraystring|/tx  instead of using position values, you will go to a |/to default|/tx  upper left corner (|jof 3 390|j) on your |/to first|/tx  string and will |/to continue where you left off|/tx  on successive strings.
|h
The global intercharacter spacing between characters is set by |/to globalkern|/tx  and typically will be one pixel for smaller fonts or two for larger. Note that the space character will be the |/to sum|/tx  of |/to one|/tx  space character width and |/to twice|/tx  the value of your |/to globalkern|/tx . Thus, spaces may appear wider than expected.
|h
Two characters are optionally reserved by |/to kern-char|/tx  and |/to kern+char|/tx  for individual pair kerning. A redefined |/to "`"|/tx  backs you up one pixel column to the left, while a |/to "~"|/tx  moves you forward one to the right.
|h
The code includes an optional |/to shrinkfactor|/tx  that lets you clip the characters somewhat before analysis. This is possibly useful to darken and improve smaller font sizes but looks awful on the larger ones. Try using a shrinkfactor of |/to 0.04|/tx  below 7 pixels of height. But leave it at zero otherwise.
|h
There are some diagnostics hidden in the code that can be activated by uncommenting. Others are easily added. These give you views of the actual characters being sampled, outputs of the generated arrays, and various timing options. Error trapping is modest at present.
|h
Each new generated character is currently reported to the logfile, giving you an estimate of progress. A typical hundred character bitmap annotation should take around nine seconds or less. These routines can be further sped up significantly by reducing boundary precision and averaging samples, along with some new code optimization.
|h

|h
) cl 

startnewpage 

(|c
For  More  Help
|d
Lots of additional uses and examples of true antialiasing are in our |/su Fonts and|/aafont01          |/su Images|1|/aafont01  and |/su Precision Bitmapped Fonts|1|/bmfont01  library pages. More on |/su PostScript|1|/post01  and        |/su Acrobat|1|/acrob01  in their separate resource areas. Free |/su Gonzo Utilities|1|/gonzoutils  and many use examples are found |/su here|1|/gonzoutils .
|h 
Additional consulting services are available per our |/su Infopack|1|/info01  services and on a contract or an hourly basis. Additional |/su GuruGrams|1|/gurgrm01  are found |/su here|1|/gurgrm01 .
|h
Further |/surl |6GuruGrams|1|/gurgrm01  await your ongoing support as a |/surl |6Synergetics Partner|1|/advt01 .
) cl 


startnewpage





%%%%%%%%%%%%%%%%%%%%


% EOF